Category
Country of Origin

JET

Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,758.80
$28,894
As low as $571.81/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,419.09
$6,477
As low as $210.50/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$27,917
As low as $552.47/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,425
As low as $344.84/mo
View Details
Jet JAT-630, 3/8" Reversible Angle Drill 505630 at Elite Metal Tools
Jet JAT-630, 3/8" Reversible Angle Drill 505630
  • Bottom-mounted, forward/reverse switch locks in place
  • Ergonomically Designed Grip
  • Head rotates 360° for increased versatility
  • Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
  • Low profile angled head for work in tight spots
MSRP: $416.89
$280
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698111 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698111
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,245.45
$29,970
As low as $593.10/mo
View Details
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529 at Elite Metal Tools
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529
  • 5/8" diameter
MSRP: $413.59
$275
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321493 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321493
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $82,166.80
$62,495
As low as $1,236.77/mo
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000
  • HSS steel
  • 62-64 HRc
  • 225 x 32 x 2mm
  • 180T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $317.56
$279
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698061 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698061
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601 at Elite Metal Tools
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601
  • Include headstock bracket, tailstock bracket, both centers, and all needed hardware
MSRP: $270.26
$245
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $478.49
$296
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,231.66
$27,066
As low as $535.63/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $685.29
$493
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,312.72
$26,402
As low as $522.49/mo
View Details
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700 at Elite Metal Tools
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $3,747.69
$2,195
As low as $71.33/mo
View Details
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,413.49
$907
As low as $29.47/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894165 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894165
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,395
As low as $561.93/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $34,461.45
$27,233
As low as $538.94/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280 at Elite Metal Tools
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
MSRP: $1,756.80
$1,474
As low as $47.90/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $72,639.26
$55,795
As low as $1,104.18/mo
View Details
Jet JTM-1254VS with X & Y Powerfeeds & Air Power Drawbar 698028 at Elite Metal Tools
Jet JTM-1254VS with X & Y Powerfeeds & Air Power Drawbar 698028
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,055.99
$26,939
As low as $533.12/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,406
As low as $562.15/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.