JET

  • Layout
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K at Elite Metal Tools
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,170.99
$9,588
As low as $311.61/mo
View Details
Jet 10-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1000WO-15 209115 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1000WO-15 209115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,497.79
$3,223
As low as $104.74/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698074 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698074
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,029.07
$29,090
As low as $575.69/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $701.79
$525
As low as $17.06/mo
View Details
Jet JAT-434, 4" Aluminum Angle Grinder 505434 at Elite Metal Tools
Jet JAT-434, 4" Aluminum Angle Grinder 505434
  • Built-in regulator to adjust speed
  • Industrial bearings for durability and smooth operation
  • Lightweight aluminum housing
  • Lock off safety lever to protect against accidental startup
  • Precision beveled gears produce lower vibration and a longer operating life
MSRP: $367.39
$262
View Details
Jet ET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 180T for FK350 579039 at Elite Metal Tools
Jet ET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 180T for FK350 579039
  • HSS Steam tempered steel
  • 62/64 HRc
  • 350 x 32 x 5mm
  • 180 teeth
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $770.32
$710
As low as $23.07/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,083.45
$32,023
As low as $633.73/mo
View Details
Jet JLH-150WO-5, 1-1/2 Ton, Lever Hoist with 5' Lift with Overload Protection 376300 at Elite Metal Tools
Jet JLH-150WO-5, 1-1/2 Ton, Lever Hoist with 5' Lift with Overload Protection 376300
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $892.09
$599
As low as $19.46/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,069.53
$27,673
As low as $547.64/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,893.99
$28,995
As low as $573.81/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698066 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698066
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,029.45
$32,707
As low as $647.27/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894163 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894163
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$34,755
As low as $687.80/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,326.53
$30,752
As low as $608.58/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose 414725 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose 414725
  • Flexible
  • For temperatures up to 180 degrees F
  • 8 ft length
  • Hose dia 3 in.
MSRP: $675.72
$632
As low as $20.54/mo
View Details
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703 at Elite Metal Tools
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,889.49
$2,799
As low as $90.96/mo
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,075.79
$705
As low as $22.91/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698057 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698057
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,029.07
$29,090
As low as $575.69/mo
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) 691197 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) 691197
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,225
As low as $340.88/mo
View Details
Jet JAT-451, 5" Angle Grinder 505451 at Elite Metal Tools
Jet JAT-451, 5" Angle Grinder 505451
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $600.59
$435
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651 at Elite Metal Tools
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $389.39
$269
View Details
Jet JTM-1 Mill With Newall DP500 DRO 692187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP500 DRO 692187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $19,190.26
$14,737
As low as $478.95/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.