JET

  • Layout
Jet 1/2-Ton Hand Chain Hoist with 15' Lift | S90-050-15 101901 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 15' Lift | S90-050-15 101901
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $386.09
$255
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 220T for FK350-2/4 579038 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 220T for FK350-2/4 579038
  • HSS Steam tempered steel
  • 62/64 HRc
  • 350 x 32 x 5mm
  • 220 teeth
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $855.46
$797
As low as $25.90/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,055.99
$26,939
As low as $533.12/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,221.69
$2,994
As low as $97.30/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698131 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698131
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$28,797
As low as $569.89/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690640 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690640
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$27,917
As low as $552.47/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690647 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690647
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,188
As low as $577.63/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO 351152 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO 351152
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $14,054.80
$10,895
As low as $354.08/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058
  • 58-pc Clamping Kit with Tray for 3/4" T-slots
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $310.85
$280
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376303 at Elite Metal Tools
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376303
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,071.39
$698
As low as $22.68/mo
View Details
Jet 3SS-1C-15, 3-Ton Electric Chain Hoist 1-Phase 15' Lift 311500 at Elite Metal Tools
Jet 3SS-1C-15, 3-Ton Electric Chain Hoist 1-Phase 15' Lift 311500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,996.79
$5,641
As low as $183.33/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690258 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690258
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,380.26
$26,450
As low as $523.44/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,218.53
$32,120
As low as $635.65/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,569.72
$29,450
As low as $582.81/mo
View Details
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002
  • HSS steel
  • 62-64 HRc
  • 225mm
  • 120T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $312.17
$284
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,407.07
$23,494
As low as $464.94/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,395
As low as $561.93/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,245.45
$29,970
As low as $593.10/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed, Power Draw Bar and 8" Riser Block 690235 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed, Power Draw Bar and 8" Riser Block 690235
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,109.99
$26,255
As low as $519.58/mo
View Details
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640 at Elite Metal Tools
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $944.89
$632
As low as $20.54/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.