JET

  • Layout
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $263.55
$239
View Details
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,244.80
$21,925
As low as $433.89/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,224
As low as $439.81/mo
View Details
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620 at Elite Metal Tools
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $1,114.29
$745
As low as $24.21/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,813.45
$35,440
As low as $701.35/mo
View Details
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603 at Elite Metal Tools
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,267.19
$820
As low as $26.65/mo
View Details
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,787.99
$56,795
As low as $1,123.97/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,744.47
$17,457
As low as $345.47/mo
View Details
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000 at Elite Metal Tools
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $11,013.19
$6,295
As low as $204.58/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $7,048.79
$4,030
As low as $130.97/mo
View Details
Jet JAT-128, 1" Composite Impact Wrench 505128 at Elite Metal Tools
Jet JAT-128, 1" Composite Impact Wrench 505128
  • Amazing 1,400 ft.lbs. or torque while only weighing 7.45 lbs.
  • Great balance reduces wrist and hand fatigue for comfortable operation
  • One-Handed Operation, gives convenience and control in tight places
  • Only 7.9" from end of anvil to back of housing to get into tight areas easily and efficiently
  • Torque regulator switch for quick easy one hand operation
MSRP: $929.49
$621
As low as $20.18/mo
View Details
Jet JAT-450, 4" Angle Grinder 505450 at Elite Metal Tools
Jet JAT-450, 4" Angle Grinder 505450
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $574.19
$425
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $810.80
$724
As low as $23.53/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM4VS/4VS1 Milling Machines 350198K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM4VS/4VS1 Milling Machines 350198K
MSRP: $1,756.80
$1,460
As low as $47.45/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,433.99
$21,340
As low as $422.31/mo
View Details
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092 at Elite Metal Tools
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092
  • #1 Turning and facing holder
  • Specifically designed for Elite E-1236VS Lathes
  • Super Precision Tool Post
MSRP: $1,013.53
$885
As low as $28.76/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,082.53
$20,366
As low as $403.04/mo
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,880.49
$3,999
As low as $129.96/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,597.89
$3,276
As low as $106.47/mo
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $387.19
$269.50
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690648 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690648
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,188
As low as $577.63/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691201 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691201
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,947.45
$20,265
As low as $401.04/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,225
As low as $340.88/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.