JET

  • Layout
Jet JTM-1254VS with X Powerfeed 698025 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed 698025
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,866.53
$23,100
As low as $457.14/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,330
As low as $540.86/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,595
As low as $149.33/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,461.07
$22,795
As low as $451.11/mo
View Details
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071 at Elite Metal Tools
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071
  • Flood Style
  • 1/8 HP
  • 220/440V, 3 Ph
MSRP: $716.20
$677
As low as $22.00/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$28,699
As low as $567.95/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.72
$33,587
As low as $664.68/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-100-30 133130 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-100-30 133130
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,101.09
$755
As low as $24.53/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,893.45
$20,950
As low as $414.60/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,779.99
$6,147
As low as $199.77/mo
View Details
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,886.09
$3,428
As low as $111.41/mo
View Details
Jet 2SS-3C-10, 2-Ton Electric Chain Hoist 3-Phase 10' Lift 231000 at Elite Metal Tools
Jet 2SS-3C-10, 2-Ton Electric Chain Hoist 3-Phase 10' Lift 231000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,309.49
$4,231
As low as $137.50/mo
View Details
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302 at Elite Metal Tools
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $573.09
$413
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $7,559.19
$4,325
As low as $140.56/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $43,651.07
$33,880
As low as $670.48/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,379.72
$18,410
As low as $364.33/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,974.53
$21,730
As low as $430.03/mo
View Details
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K at Elite Metal Tools
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,331.59
$9,671
As low as $314.30/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$38,636
As low as $764.60/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,405
As low as $562.13/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,231.53
$25,620
As low as $507.01/mo
View Details
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187 at Elite Metal Tools
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,593.59
$2,664
As low as $86.58/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,912.39
$4,022
As low as $130.71/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,487.99
$20,655
As low as $408.76/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.