JET

  • Layout
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503 at Elite Metal Tools
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,799.99
$20,050
As low as $396.78/mo
View Details
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds and 6" Riser Block 692306 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds and 6" Riser Block 692306
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,817.09
$19,345
As low as $382.83/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $66,834.29
$51,495
As low as $1,019.08/mo
View Details
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $825.99
$555
As low as $18.03/mo
View Details
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292 at Elite Metal Tools
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
  • 30 x 7 x 7 in
MSRP: $6,511.39
$5,085
As low as $165.26/mo
View Details
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302 at Elite Metal Tools
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $520.99
$325
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,414.29
$20,495
As low as $405.59/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,314.29
$30,575
As low as $605.07/mo
View Details
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293 at Elite Metal Tools
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $6,413.09
$4,999
As low as $162.46/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,453.99
$2,005
As low as $65.16/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,297.09
$31,285
As low as $619.13/mo
View Details
Jet GH-1640ZX With Taper Attachment 321474 at Elite Metal Tools
Jet GH-1640ZX With Taper Attachment 321474
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,828.59
$41,595
As low as $823.16/mo
View Details
Jet 32" x 24" Cast Iron Table 737002 at Elite Metal Tools
Jet 32" x 24" Cast Iron Table 737002
  • 88 pound table creates solid work surface for all routing applications
  • Cast iron construction
  • Large table footprint with space for all routing applications
  • Precision machined cast iron construction
MSRP: $859.99
$775
As low as $25.18/mo
View Details
Jet SLT-330F, Scissor Lift Table With Folding Handle 140771 at Elite Metal Tools
Jet SLT-330F, Scissor Lift Table With Folding Handle 140771
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $996.99
$655
As low as $21.28/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.69
$33,399
As low as $660.96/mo
View Details
Jet GH-2680ZH With Newall DP700 DRO 321861 at Elite Metal Tools
Jet GH-2680ZH With Newall DP700 DRO 321861
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $76,331.09
$58,495
As low as $1,157.61/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,859.99
$33,845
As low as $669.79/mo
View Details
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092 at Elite Metal Tools
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092
  • Case hardened steel for durability and accuracy
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • Optional case-hardened drive cleat roller for Jet's 20 ga lock former
MSRP: $528.29
$499
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,448.59
$19,095
As low as $377.89/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $6,871.99
$3,920
As low as $127.40/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,885.69
$16,025
As low as $317.13/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,228.59
$34,110
As low as $675.03/mo
View Details
Jet GH-1860ZX With ACU-RITE 203 DRO 321484 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 203 DRO 321484
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $53,811.39
$43,799.99
As low as $866.80/mo
View Details
Jet Servo 150 Series X-Axis Table Powerfeed 350183 at Elite Metal Tools
Jet Servo 150 Series X-Axis Table Powerfeed 350183
  • Accessory for JET ELITE Mills
MSRP: $2,457.09
$1,999
As low as $64.96/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.