JET

  • Layout
On Sale
Jet JET — FB-650-5M Replacement 5 Micron Filter Bag for DC650 Dust Collector 708701 at Elite Metal Tools
Jet JET — FB-650-5M Replacement 5 Micron Filter Bag for DC650 Dust Collector 708701
  • Fits JET DC-650 units
  • These bags are especially effective for sanding and other applications that produce fine dust.
Was: $220
Now: $198
View Details
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,055.45
$18,895
As low as $373.93/mo
View Details
Jet GH-1880ZX With Taper Attachment 321486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment 321486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $66,625.45
$51,395
As low as $1,017.10/mo
View Details
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035 at Elite Metal Tools
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035
  • 10° Inclusive cutting capacity
  • Factory installation available
  • Mounts to predrilled and tapped holes
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $3,040.72
$2,465
As low as $80.11/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,705.07
$33,196
As low as $656.94/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,855.49
$2,254
As low as $73.25/mo
View Details
Jet JLP-600A-20, 6 Ton Lever Hoist with 20' Lift 287603 at Elite Metal Tools
Jet JLP-600A-20, 6 Ton Lever Hoist with 20' Lift 287603
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,928.29
$1,199
As low as $38.96/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,028.80
$25,473
As low as $504.11/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,751.79
$3,875
As low as $125.93/mo
View Details
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317 at Elite Metal Tools
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $390.49
$269
View Details
Jet JET — Air Powered Drawbar Kit for JTM1050EVS and 949EVS Milling Machines 350197K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1050EVS and 949EVS Milling Machines 350197K
MSRP: $1,756.80
$1,460
As low as $47.45/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $31,190.93
$24,865
As low as $492.07/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,112.89
$8,375
As low as $272.18/mo
View Details
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K at Elite Metal Tools
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $21,750.29
$12,090
As low as $392.92/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO & X-Axis Powerfeed 351153 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO & X-Axis Powerfeed 351153
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $17,163.07
$13,270
As low as $431.27/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691174 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691174
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,271.45
$15,665
As low as $310.01/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,741.89
$9,883
As low as $321.19/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,326.26
$27,095
As low as $536.21/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$34,760
As low as $687.90/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square knee ways and cross ways
  • Heavy-duty spindle brake
MSRP: $30,812.53
$24,590
As low as $486.63/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,405
As low as $562.13/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,501.80
$25,795
As low as $510.48/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$37,854
As low as $749.13/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$31,827
As low as $629.85/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.