JET

  • Layout
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,109.72
$21,825
As low as $431.91/mo
View Details
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020 at Elite Metal Tools
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $520.29
$318
View Details
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840 at Elite Metal Tools
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840
  • Specifically designed for Metalworking dust collection
  • Filter Efficiency: 90% @ 50 Microns
  • Filter Size: 6-3/4 X 2-5/8 X 13-1/2 In.
MSRP: $581.12
$566
As low as $18.39/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,072
As low as $733.65/mo
View Details
Jet JTM-2 Mill With X-Axis Powerfeed 690006 at Elite Metal Tools
Jet JTM-2 Mill With X-Axis Powerfeed 690006
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.26
$14,045
As low as $456.46/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,740.89
$3,351
As low as $108.90/mo
View Details
On Sale
Jet JET — Replacement Filter Bag and Collection Bag Kit, 5 Micron, for DC-650 Dust Collector 708642MF at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 5 Micron, for DC-650 Dust Collector 708642MF
  • Includes 5 Micron filter bag and 5 clear plastic collection bags
  • Filter bag is 98% efficient on 5 micron particles; 92% efficient on 3 micron; and 74% efficient on 1 micron
  • Much higher filtration efficiency than the 30 micron unit but similar in budget
  • Excellent performance in a multitude of operating conditions
Was: $231
Now: $207.90
View Details
Jet PUC_41x17, Resin Utility Cart 141012 at Elite Metal Tools
Jet PUC_41x17, Resin Utility Cart 141012
  • Ergonomic Handle helps operator stand taller when pushing cart
  • 5 inch quiet, non-marking casters
  • Handle includes built-in storage bins to hold smaller materials
  • 550 pounds of carrying capacity
  • Backed by our industry leading 2-Year Warranty
MSRP: $340.99
$238
View Details
Jet E-1236VS With ACU-RITE 203 DRO 892303 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO 892303
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $27,298.80
$21,246
As low as $420.45/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $71,963.53
$55,195
As low as $1,092.30/mo
View Details
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K at Elite Metal Tools
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,748.49
$9,886
As low as $321.29/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,677.72
$28,112
As low as $556.33/mo
View Details
Jet JAT-501, HVLP Mini Spray Gun 505501 at Elite Metal Tools
Jet JAT-501, HVLP Mini Spray Gun 505501
  • Gravity feed 125 cc cup included
  • High performance is coupled with an anodized aluminum body for easier cleaning
  • HVLP technology improves material transfer for a more consistent coverage with minimal overspray
  • Includes 1.0 mm fluid nozzle with additional nozzle kits available
  • Smaller, compact design reduces weight and operator fatigue
MSRP: $320.09
$225
View Details
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500 at Elite Metal Tools
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $12,451.99
$7,095
As low as $230.58/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift Electric 2 Speed Trolley and 4 Button Wired Pendant 16ft 144003K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift Electric 2 Speed Trolley and 4 Button Wired Pendant 16ft 144003K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,174.89
$6,351
As low as $206.40/mo
View Details
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092 at Elite Metal Tools
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092
  • Case hardened steel for durability and accuracy
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • Optional case-hardened drive cleat roller for Jet's 20 ga lock former
MSRP: $581.12
$548
As low as $17.81/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095
  • Certified Meehanite® castings
  • Large Diameter quill is chromed
  • Precision bored and honed milling head
MSRP: $22,974.26
$17,624
As low as $348.77/mo
View Details
Jet JG-300, 3 Ton Grip Puller Without Cable 286530 at Elite Metal Tools
Jet JG-300, 3 Ton Grip Puller Without Cable 286530
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,379.39
$865
As low as $28.11/mo
View Details
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503 at Elite Metal Tools
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,379.99
$21,995
As low as $435.28/mo
View Details
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K at Elite Metal Tools
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,628.99
$7,619
As low as $247.61/mo
View Details
Jet Mill With 3-Axis Newall DP500 DRO (Quill) With X-Axis Powerfeeds | JTM-1 692191 at Elite Metal Tools
Jet Mill With 3-Axis Newall DP500 DRO (Quill) With X-Axis Powerfeeds | JTM-1 692191
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,730.93
$16,724
As low as $330.96/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Collet Closer 892421 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Collet Closer 892421
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,407.45
$27,917
As low as $552.47/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,677.07
$20,070
As low as $397.18/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,366.39
$5,745
As low as $186.71/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.