JET

  • Layout
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK at Elite Metal Tools
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK
  • All steel construction
  • Two large cabinets with hinged locking locks to store supplies
  • Gray
  • 30" x 48" x 40"
  • Assembly required
MSRP: $1,121.66
$965
As low as $31.36/mo
View Details
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006 at Elite Metal Tools
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $1,112.09
$725
As low as $23.56/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,271.45
$15,665
As low as $310.01/mo
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308
  • Carbon steel
  • 4/6VT
  • 1" x .035" x 130"
$192
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,791.29
$4,410
As low as $143.32/mo
View Details
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012 at Elite Metal Tools
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $247.27
$236
View Details
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K at Elite Metal Tools
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $287.09
$215
View Details
On Sale
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566 at Elite Metal Tools
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566
  • Compatible with JET 708599 Disc Sander
  • Shop the Jet Parts Store for all your replacement part needs
Was: $401
Now: $360.90
View Details
Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201 at Elite Metal Tools
Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $425.69
$268
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,109.99
$26,255
As low as $519.58/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$32,609
As low as $645.33/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,920.26
$18,795
As low as $371.95/mo
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $24,055.45
$18,895
As low as $373.93/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691176 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691176
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,406.53
$15,765
As low as $311.98/mo
View Details
Jet GH-1440-1 Lathe with Taper Attachment 323371 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment 323371
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $36,758.80
$28,845
As low as $570.84/mo
View Details
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190 at Elite Metal Tools
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190
MSRP: $233.74
$225
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,893.72
$25,375
As low as $502.17/mo
View Details
Jet BDB-919 STAND 321375 at Elite Metal Tools
Jet BDB-919 STAND 321375
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-919 lathe
MSRP: $743.26
$659
As low as $21.41/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $21,082.26
$16,255
As low as $321.68/mo
View Details
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634 at Elite Metal Tools
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,243.32
$1,094
As low as $35.55/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,245.99
$38,342
As low as $758.78/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO and X-Axis Table Powerfeed 350120 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO and X-Axis Table Powerfeed 350120
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $12,027.72
$9,415
As low as $305.98/mo
View Details
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016 at Elite Metal Tools
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016
  • 35 collets
  • 1/16 to 1-1/8 by 16ths
  • Metal rack
  • Precision ground components
MSRP: $891.87
$819
As low as $26.61/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,857.19
$10,975
As low as $356.68/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.