JET

  • Layout
Jet JAT-412, 1/4" Industrial Gearless Die Grinder 505412 at Elite Metal Tools
Jet JAT-412, 1/4" Industrial Gearless Die Grinder 505412
  • Advanced easy release safety lever
  • Comes with two wrenches for easy accessory changes
  • Composite handle for easy cleaning and comfort during extended use
  • Direct drive replaces beveled gearing for extended life
  • Kevlar rotor vanes to extend life and reduce maintenance
MSRP: $392.69
$269
View Details
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315 at Elite Metal Tools
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,840.53
$38,049
As low as $752.98/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO 892411 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO 892411
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,380.26
$26,451
As low as $523.46/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,353.72
$32,218
As low as $637.59/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,353.07
$24,980
As low as $494.35/mo
View Details
Jet JAT-820, Flux Chipper 505820 at Elite Metal Tools
Jet JAT-820, Flux Chipper 505820
  • Ball lock retainer permits quick tool change
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes (1) wide angle chisel
  • Backed by the industry leading 2-Year Warranty
MSRP: $486.19
$325
View Details
Jet E-1236VS With Newall DP700 DRO 892319 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO 892319
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $25,541.99
$19,975
As low as $395.30/mo
View Details
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301 at Elite Metal Tools
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Spindle utilizes class 7210 (P4, ABEC-7) precision angular bearings for the industry-leading spindle taper runout of 0.00012"
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,210
As low as $558.27/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,677.07
$20,070
As low as $397.18/mo
View Details
Jet JCT-5670, 1/2" Industrial Air Drill 550670 at Elite Metal Tools
Jet JCT-5670, 1/2" Industrial Air Drill 550670
  • Auxiliary handle can be mounted on either side for increased operator control
  • Ergonomic "D" style handle with inside teasing trigger
  • External mounted Zerk® grease fittings feed lubricants to the industrial bearing design
  • Industrial gear train for high torque drilling applications
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,512.49
$956
As low as $31.07/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,137.45
$31,325
As low as $619.92/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO, Collet Closer and Taper Attachment 323385 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO, Collet Closer and Taper Attachment 323385
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $48,651.45
$38,635
As low as $764.58/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,082.80
$24,789
As low as $490.57/mo
View Details
Jet ETM-949 Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894041 at Elite Metal Tools
Jet ETM-949 Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894041
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $85,815.72
$65,518
As low as $1,296.60/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645 at Elite Metal Tools
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,139.59
$731
As low as $23.75/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$31,595
As low as $625.26/mo
View Details
Jet JAT-752, 1/2" x 24" Mini Belt Sander 505752 at Elite Metal Tools
Jet JAT-752, 1/2" x 24" Mini Belt Sander 505752
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $609.39
$462
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894322 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894322
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $50,273.07
$39,809
As low as $787.82/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$32,609
As low as $645.33/mo
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $24,055.45
$18,895
As low as $373.93/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,245.99
$38,342
As low as $758.78/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,893.72
$25,375
As low as $502.17/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.