JET

  • Layout
Jet JAT-127, 3/4" Composite Impact Wrench 505127 at Elite Metal Tools
Jet JAT-127, 3/4" Composite Impact Wrench 505127
  • Amazing 1,400 ft.lbs. or torque while only weighing 7.2 lbs.
  • Great balance reduces wrist and hand fatigue for comfortable operation
  • One-Handed Operation, gives convenience and control in tight places
  • Only 7.9" from end of anvil to back of housing to get into tight areas easily and efficiently
  • Torque regulator switch for quick easy one hand operation
MSRP: $776.99
$535
As low as $17.38/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,665.69
$31,545
As low as $624.27/mo
View Details
Jet GH-1860ZX With Newall DP700 DRO With Taper Attachment and Collet Closer 321557 at Elite Metal Tools
Jet GH-1860ZX With Newall DP700 DRO With Taper Attachment and Collet Closer 321557
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $60,937.09
$47,295
As low as $935.96/mo
View Details
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321593 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321593
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $66,957.09
$51,795
As low as $1,025.02/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,399.99
$27,040
As low as $535.12/mo
View Details
Jet JAT-128, 1" Composite Impact Wrench 505128 at Elite Metal Tools
Jet JAT-128, 1" Composite Impact Wrench 505128
  • Amazing 1,400 ft.lbs. or torque while only weighing 7.45 lbs.
  • Great balance reduces wrist and hand fatigue for comfortable operation
  • One-Handed Operation, gives convenience and control in tight places
  • Only 7.9" from end of anvil to back of housing to get into tight areas easily and efficiently
  • Torque regulator switch for quick easy one hand operation
MSRP: $844.99
$565
As low as $18.36/mo
View Details
Jet GH-1860ZX With Newall DP700 DRO 321485 at Elite Metal Tools
Jet GH-1860ZX With Newall DP700 DRO 321485
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $53,639.39
$41,995
As low as $831.08/mo
View Details
Jet GH-1640ZX With Collet Closer 321439 at Elite Metal Tools
Jet GH-1640ZX With Collet Closer 321439
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $51,354.29
$40,495
As low as $801.39/mo
View Details
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751 at Elite Metal Tools
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $706.99
$499
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $36,857.09
$28,805
As low as $570.05/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $65,421.39
$50,595
As low as $1,001.27/mo
View Details
Jet E-1440VS With Newall DP700 DRO 892469 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO 892469
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,468.59
$23,410
As low as $463.28/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,297.09
$31,285
As low as $619.13/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $41,771.39
$32,345
As low as $640.10/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO 892303 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO 892303
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $24,817.09
$19,345
As low as $382.83/mo
View Details
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $67,079.99
$51,695
As low as $1,023.04/mo
View Details
Jet GH-1640ZX With Taper Attachment 321474 at Elite Metal Tools
Jet GH-1640ZX With Taper Attachment 321474
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,828.59
$41,595
As low as $823.16/mo
View Details
Jet GH-1640ZX With Newall DP700 DRO With Collet Closer 321494 at Elite Metal Tools
Jet GH-1640ZX With Newall DP700 DRO With Collet Closer 321494
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $57,619.99
$44,995
As low as $890.45/mo
View Details
Jet GH-1860ZX With ACU-RITE 203 DRO With Collet Closer 321491 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 203 DRO With Collet Closer 321491
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $58,651.99
$45,695
As low as $904.30/mo
View Details
Jet JCT-2611, 8" Rivet Buster 550611 at Elite Metal Tools
Jet JCT-2611, 8" Rivet Buster 550611
  • Ergonomic Drop Forged "D" Style handle
  • Heat treated steel barrel for increased durability
  • Heavy-Duty, industry proven valve design
  • Ideal for busting large rivets or concrete demolition
  • Positive retention of piston for increased user safety
MSRP: $2,355.99
$1,399
As low as $45.46/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,788.59
$31,635
As low as $626.05/mo
View Details
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment and Collet Closer 321104 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment and Collet Closer 321104
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $24,509.99
$19,125
As low as $378.48/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,997.09
$28,189
As low as $557.86/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894127 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894127
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,805.69
$30,930
As low as $612.10/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.