JET

  • Layout
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,488.80
$32,826
As low as $649.62/mo
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,075.79
$705
As low as $22.91/mo
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet GH-26120ZH With ACU-RITE 203 DRO With Taper Attachment 321895 at Elite Metal Tools
Jet GH-26120ZH With ACU-RITE 203 DRO With Taper Attachment 321895
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $99,194.80
$76,595
As low as $1,515.81/mo
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO With Collet Closer 321492 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO With Collet Closer 321492
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,247.45
$56,999
As low as $1,128.01/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,286.07
$32,677
As low as $646.67/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,272.80
$35,606
As low as $704.64/mo
View Details
Jet HD-3T, 3-Ton Wide Beam Clamp 202730 at Elite Metal Tools
Jet HD-3T, 3-Ton Wide Beam Clamp 202730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $261.79
$199
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,083.45
$32,528
As low as $643.72/mo
View Details
Jet JBC-5, 5-Ton Beam Clamp 252750 at Elite Metal Tools
Jet JBC-5, 5-Ton Beam Clamp 252750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $515.89
$316
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet GH-2680ZH With Newall DP700 DRO and Taper Attachment 321862 at Elite Metal Tools
Jet GH-2680ZH With Newall DP700 DRO and Taper Attachment 321862
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $94,370.20
$72,999
As low as $1,444.65/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,657
As low as $745.23/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,953
As low as $572.97/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $80,747.80
$62,826
As low as $1,243.32/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $72,639.26
$56,999
As low as $1,128.01/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $34,461.45
$27,662
As low as $547.43/mo
View Details
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431 at Elite Metal Tools
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $288.19
$197
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529 at Elite Metal Tools
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529
  • 5/8" diameter
MSRP: $413.59
$275
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.