JET

  • Layout
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO 894109 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO 894109
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,115.71
$23,699
As low as $469.00/mo
View Details
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K at Elite Metal Tools
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $13,956
$8,753
As low as $284.47/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894158 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894158
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,634.49
$25,749
As low as $509.57/mo
View Details
Jet GH-2280ZX With Newall DP700 DRO 321880 at Elite Metal Tools
Jet GH-2280ZX With Newall DP700 DRO 321880
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $47,215.71
$38,599
As low as $763.87/mo
View Details
Jet GH-1660ZX With ACU-RITE 203 DRO With Taper Attachment 321543 at Elite Metal Tools
Jet GH-1660ZX With ACU-RITE 203 DRO With Taper Attachment 321543
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $46,605.71
$37,999
As low as $752.00/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment 892312 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment 892312
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $25,698.57
$20,859
As low as $412.79/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,162
$2,015
As low as $65.48/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,909.43
$25,159
As low as $497.89/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds 894191 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds 894191
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,403.71
$31,259
As low as $618.61/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,381.43
$28,799
As low as $569.93/mo
View Details
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K at Elite Metal Tools
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $19,344
$12,131
As low as $394.25/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894194 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894194
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,750
$29,099
As low as $575.86/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,801.43
$26,699
As low as $528.37/mo
View Details
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K at Elite Metal Tools
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $14,324
$8,984
As low as $291.98/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,398.57
$27,999
As low as $554.10/mo
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $385
$251.99
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894133 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894133
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,801.43
$26,699
As low as $528.37/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y-Axis Powerfeeds 894207 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y-Axis Powerfeeds 894207
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,487.14
$29,699
As low as $587.74/mo
View Details
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K at Elite Metal Tools
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $13,956
$8,753
As low as $284.47/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894125 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894125
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,627.14
$28,999
As low as $573.89/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894167 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894167
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,297.81
$29,579
As low as $585.36/mo
View Details
Jet ETM-949 mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894113 at Elite Metal Tools
Jet ETM-949 mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894113
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,487.14
$29,699
As low as $587.74/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $24,527.14
$19,899
As low as $393.80/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $27,308.57
$22,229
As low as $439.91/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.