JET

  • Layout
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,067
As low as $595.02/mo
View Details
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $530.19
$355
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,758.80
$28,894
As low as $571.81/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,221.69
$2,994
As low as $97.30/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,488.80
$32,316
As low as $639.53/mo
View Details
Jet 3SS-1C-15, 3-Ton Electric Chain Hoist 1-Phase 15' Lift 311500 at Elite Metal Tools
Jet 3SS-1C-15, 3-Ton Electric Chain Hoist 1-Phase 15' Lift 311500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,996.79
$5,641
As low as $183.33/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894145
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,569.72
$29,450
As low as $582.81/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,395
As low as $561.93/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894169 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894169
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$34,555
As low as $683.84/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,922.19
$4,495
As low as $146.08/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-460-010 144007 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-460-010 144007
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,426.59
$7,515
As low as $244.23/mo
View Details
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K at Elite Metal Tools
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,170.99
$9,588
As low as $311.61/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894163 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894163
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$34,755
As low as $687.80/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 10' Lift TS050-460-010 Electric 2 Speed Trolley 3PH MT050-4 144001K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 10' Lift TS050-460-010 Electric 2 Speed Trolley 3PH MT050-4 144001K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,909.69
$6,731
As low as $218.75/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,083.45
$32,023
As low as $633.73/mo
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,018.89
$5,128
As low as $166.66/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-230-010 140233 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-230-010 140233
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,954.09
$4,498
As low as $146.18/mo
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO With Collet Closer 321492 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO With Collet Closer 321492
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,247.45
$56,095
As low as $1,110.12/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $7,925.49
$4,483
As low as $145.69/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,503
As low as $564.07/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,419.09
$6,477
As low as $210.50/mo
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321493 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321493
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $82,166.80
$62,495
As low as $1,236.77/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.