JET

  • Layout
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $39,867.07
$31,140
As low as $616.26/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $51,219.07
$40,493
As low as $801.35/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,407.99
$925
As low as $30.06/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $33,109.99
$26,255
As low as $519.58/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,346
As low as $699.49/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,299.72
$32,902
As low as $651.13/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,948.53
$35,542
As low as $703.37/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $342.09
$247.50
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894336 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894336
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,056.80
$38,929
As low as $770.40/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,191.72
$34,271
As low as $678.22/mo
View Details
Jet E-1440VS With Collet Closer 892451 at Elite Metal Tools
Jet E-1440VS With Collet Closer 892451
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $32,163.99
$25,571
As low as $506.05/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,921.45
$34,075
As low as $674.34/mo
View Details
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds 894107 at Elite Metal Tools
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds 894107
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,461.45
$27,233
As low as $538.94/mo
View Details
Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,468.79
$5,395
As low as $175.33/mo
View Details
Jet E-1236VS With Collet Closer 892301 at Elite Metal Tools
Jet E-1236VS With Collet Closer 892301
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,650
As low as $408.66/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO 892311 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO 892311
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $25,001.45
$19,584
As low as $387.56/mo
View Details
Jet E-1340VS With Collet Closer 892401 at Elite Metal Tools
Jet E-1340VS With Collet Closer 892401
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,866.53
$23,103
As low as $457.20/mo
View Details
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503 at Elite Metal Tools
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,066.99
$673
As low as $21.87/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $44,597.07
$34,495
As low as $682.65/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.