JET

  • Layout
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $14,638.79
$8,195
As low as $266.33/mo
View Details
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K at Elite Metal Tools
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $21,922.99
$12,182
As low as $395.91/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $44,597.07
$34,564
As low as $684.02/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,127.99
$4,135
As low as $134.38/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,839.99
$29,676.48
As low as $587.29/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO 892453 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO 892453
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,326.26
$27,135
As low as $537.00/mo
View Details
Jet E-1340VS With Newall DP700 DRO 892419 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO 892419
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,475.53
$35,200
As low as $696.60/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet E-1340VS With Taper Attachment and Collet Closer 892402 at Elite Metal Tools
Jet E-1340VS With Taper Attachment and Collet Closer 892402
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,920.80
$26,842
As low as $531.20/mo
View Details
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185 at Elite Metal Tools
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,375
As low as $77.18/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,218.80
$36,876
As low as $729.77/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,799.39
$2,225
As low as $72.31/mo
View Details
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444 at Elite Metal Tools
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $34,191.07
$26,995
As low as $534.23/mo
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,743.79
$5,495
As low as $178.58/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Gearbox provides larger threading and feed capabilities with no gear changes
  • Inch-metric dials are standard
MSRP: $40,542.80
$31,632
As low as $625.99/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 15' Lift | 1/2SS-3C-15 123150 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 15' Lift | 1/2SS-3C-15 123150
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,411.99
$3,199
As low as $103.96/mo
View Details
Jet GH-1440B with Newall DP500 & Taper Attachment 323448 at Elite Metal Tools
Jet GH-1440B with Newall DP500 & Taper Attachment 323448
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $27,109.60
$21,095
As low as $417.47/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894339 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894339
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,169
As low as $735.57/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,353.45
$28,601
As low as $566.01/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,543.07
$35,248
As low as $697.55/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894308 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894308
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,975.45
$33,391
As low as $660.80/mo
View Details
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101 at Elite Metal Tools
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,677.45
$23,690
As low as $468.82/mo
View Details
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K at Elite Metal Tools
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $22,970.19
$12,723
As low as $413.49/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.