JET

  • Layout
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,432.86
$26,399
As low as $522.43/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $21,042.99
$17,119
As low as $338.78/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,263.43
$27,889
As low as $551.92/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,030
$27,699
As low as $548.16/mo
View Details
Jet E-1236VS With Newall DP700 DRO 892319 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO 892319
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $21,870
$17,659
As low as $349.47/mo
View Details
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $64,449.43
$52,459
As low as $1,038.16/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,177.43
$27,819
As low as $550.53/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,723.14
$31,519
As low as $623.76/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,951.43
$28,449
As low as $563.00/mo
View Details
Jet VOLT 10-Ton Variable-Speed Electric Hoist 3PH 230V 10' Lift | VOLT-1000- 13P-10 183010 at Elite Metal Tools
Jet VOLT 10-Ton Variable-Speed Electric Hoist 3PH 230V 10' Lift | VOLT-1000- 13P-10 183010
  • Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
  • Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
  • Heavy-duty nylon chain bag with reinforcing metal brackets included
  • Industry proven Grade 80 black oxide coated load chain
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
MSRP: $32,642
$20,809
As low as $411.81/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $29,524.99
$23,899
As low as $472.96/mo
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $19,162.99
$15,599
As low as $308.70/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $11,370
$7,132.99
As low as $231.82/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $20,000
$16,399
As low as $324.53/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $12,126
$7,606.16
As low as $247.20/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $29,137.14
$23,799
As low as $470.98/mo
View Details
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301 at Elite Metal Tools
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Spindle utilizes class 7210 (P4, ABEC-7) precision angular bearings for the industry-leading spindle taper runout of 0.00012"
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,712.86
$24,999
As low as $494.73/mo
View Details
Jet GH-1440ZX With ACU-RITE 303 DRO 321301 at Elite Metal Tools
Jet GH-1440ZX With ACU-RITE 303 DRO 321301
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $38,094.29
$31,259
As low as $618.61/mo
View Details
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302 at Elite Metal Tools
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,688.29
$24,979
As low as $494.33/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $26,360
$21,429
As low as $424.07/mo
View Details
Jet GH-1660ZX With ACU-RITE 303 DRO With Collet Closer 321390 at Elite Metal Tools
Jet GH-1660ZX With ACU-RITE 303 DRO With Collet Closer 321390
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $47,438.99
$38,849
As low as $768.82/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,712.86
$24,999
As low as $494.73/mo
View Details
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,304.29
$18,799
As low as $372.03/mo
View Details
Jet GHB-1340A With ACU-RITE 203 DRO and Collet Closer 321125 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO and Collet Closer 321125
  • 6" 3-jaw direct mount scroll chuck
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,468.99
$14,829
As low as $481.94/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.