JET

  • Layout
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,413.49
$907
As low as $29.47/mo
View Details
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K at Elite Metal Tools
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,310.79
$9,288
As low as $301.86/mo
View Details
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702 at Elite Metal Tools
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,848.79
$2,799
As low as $90.96/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894134 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894134
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,705.07
$33,720
As low as $667.31/mo
View Details
Jet 5-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-500WO-20 208120 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-500WO-20 208120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $2,426.59
$1,465
As low as $47.61/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,213.29
$777
As low as $25.25/mo
View Details
Jet E-1236VS With Taper Attachment and Collet Closer 892302 at Elite Metal Tools
Jet E-1236VS With Taper Attachment and Collet Closer 892302
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700 at Elite Metal Tools
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $3,747.69
$2,195
As low as $71.33/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,343.89
$8,640
As low as $280.80/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,650.80
$30,741
As low as $608.36/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $624.79
$450
View Details
Jet 1-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-100WO-20 203120 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-100WO-20 203120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $832.69
$550
As low as $17.87/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$29,450
As low as $582.81/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-230-010 140233 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-230-010 140233
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,954.09
$4,569
As low as $148.49/mo
View Details
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300 at Elite Metal Tools
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $502.69
$325
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,481.89
$5,896
As low as $191.62/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $613.79
$455
View Details
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $636.89
$475
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $756.79
$522
As low as $16.96/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $685.29
$493
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $86,491.45
$66,999
As low as $1,325.91/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and Servo X, Y-Axis Powerfeeds 894219 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and Servo X, Y-Axis Powerfeeds 894219
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,326.53
$31,237
As low as $618.18/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894160 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894160
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,434.80
$33,521
As low as $663.38/mo
View Details
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210 at Elite Metal Tools
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $487.29
$315
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.