JET

  • Layout
On Sale
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO 894109 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO 894109
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,650.53
Was: $27,067
Now: $17,067
As low as $337.75/mo
View Details
Jet GH-26120ZH With ACU-RITE 203 DRO With Taper Attachment 321895 at Elite Metal Tools
Jet GH-26120ZH With ACU-RITE 203 DRO With Taper Attachment 321895
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $99,194.80
$76,595
As low as $1,515.81/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $927.29
$635
As low as $20.63/mo
View Details
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $12,508.09
$7,195
As low as $233.83/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-230-010 140236 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-230-010 140236
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,149.69
$5,721
As low as $185.93/mo
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $478.49
$296
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet 2-Ton Hand Chain Hoist with 15' Lift | S90-200-15 101931 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 15' Lift | S90-200-15 101931
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $721.59
$495
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,018.89
$5,128
As low as $166.66/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $829.39
$561
As low as $18.23/mo
View Details
On Sale
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,866.53
Was: $23,468
Now: $13,468
As low as $266.53/mo
View Details
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000 at Elite Metal Tools
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,308.29
$4,799
As low as $155.96/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,590.09
$3,853
As low as $125.22/mo
View Details
Jet JBC-5, 5-Ton Beam Clamp 252750 at Elite Metal Tools
Jet JBC-5, 5-Ton Beam Clamp 252750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $515.89
$316
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $80,747.80
$62,826
As low as $1,243.32/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,953
As low as $572.97/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $7,048.79
$4,094
As low as $133.05/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892422 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892422
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,191.45
$31,138
As low as $616.22/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,867.07
$31,634
As low as $626.03/mo
View Details
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501 at Elite Metal Tools
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $909.69
$590
As low as $19.17/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,419.09
$6,579
As low as $213.81/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.