JET

  • Layout
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.72
$34,116
As low as $675.15/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,029.07
$29,549
As low as $584.77/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,893.45
$21,283
As low as $421.19/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,461.07
$23,170
As low as $458.53/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $21,622.80
$16,909
As low as $334.62/mo
View Details
Jet JTM-2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $13,162.92
$10,399
As low as $337.96/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $29,190.80
$22,972
As low as $454.61/mo
View Details
Jet E-1440VS With Newall DP700 DRO 892469 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO 892469
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,515.45
$26,967
As low as $533.67/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,379.07
$10,558
As low as $343.13/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet E-1440VS With Taper Attachment and Collet Closer 892452 at Elite Metal Tools
Jet E-1440VS With Taper Attachment and Collet Closer 892452
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,542.53
$28,457
As low as $563.16/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,096.07
$21,432
As low as $424.13/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,231.53
$26,024
As low as $515.01/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,379.72
$18,702
As low as $370.11/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,974.53
$22,078
As low as $436.92/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$29,450
As low as $582.81/mo
View Details
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504 at Elite Metal Tools
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,718.45
$30,790
As low as $609.33/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,574
As low as $446.73/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.