JET

  • Layout
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,054.57
$27,719.00
As low as $548/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$26,801.43
$21,789.00
As low as $431/mo
View Details
Jet Spider for 2" Spindle Bore 650226 at Elite Metal Tools
Jet Spider for 2" Spindle Bore 650226
  • Gun-smithing spider adds functionality to the JET GH-1440B lathe
$165.00
View Details
Jet GH-1660ZX With ACU-RITE 303 DRO 321388 at Elite Metal Tools
Jet GH-1660ZX With ACU-RITE 303 DRO 321388
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$40,821.43
$33,579.00
As low as $664/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$21,577.14
$17,499.00
As low as $346/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,995.71
$29,299.00
As low as $579/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$54,584.29
$43,999.00
As low as $870/mo
View Details
Jet BDB-919 STAND 321375 at Elite Metal Tools
Jet BDB-919 STAND 321375
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-919 lathe
$533.99
$520.00
As low as $16/mo
View Details
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155 at Elite Metal Tools
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
$663.25
$610.00
As low as $19/mo
View Details
Jet JET — 400 Series Quick Change Tool Post 650305 at Elite Metal Tools
Jet JET — 400 Series Quick Change Tool Post 650305
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 14" - 20" swing lathes
$954.00
$875.00
As low as $28/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$33,317.43
$27,119.00
As low as $536/mo
View Details
Jet BDB-1340A With ACU-RITE 203 DRO 321121 at Elite Metal Tools
Jet BDB-1340A With ACU-RITE 203 DRO 321121
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$15,357.99
$12,599.00
As low as $409/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
$2,818.57
$2,299.00
As low as $74/mo
View Details
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Collet Closer 323416 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Collet Closer 323416
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$29,451.99
$24,269.00
As low as $480/mo
View Details
Jet BDB-1340A With Taper Attachment 321120 at Elite Metal Tools
Jet BDB-1340A With Taper Attachment 321120
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$15,035.71
$12,329.00
As low as $400/mo
View Details
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581
  • 6” 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$17,431.43
$14,279.00
As low as $464/mo
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
$19,162.99
$15,599.00
As low as $308/mo
View Details
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010 at Elite Metal Tools
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$25,061.40
$20,399.00
As low as $403/mo
View Details
Jet GH-1440-3 with NMS300 DRO 323415 at Elite Metal Tools
Jet GH-1440-3 with NMS300 DRO 323415
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,445.71
$19,279.00
As low as $381/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,951.43
$28,449.00
As low as $563/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894366 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894366
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,971.14
$29,279.00
As low as $579/mo
View Details
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK at Elite Metal Tools
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK
  • All steel construction
  • Two large cabinets with hinged locking locks to store supplies
  • Gray
  • 30" x 48" x 40"
  • Assembly required
$921.43
$814.00
As low as $26/mo
View Details
Jet Taper Attachment For ELITE E-1236VS Lathe 892005 at Elite Metal Tools
Jet Taper Attachment For ELITE E-1236VS Lathe 892005
  • 10° Inclusive cutting capacity
  • Factory installation available
  • Mounts to predrilled and tapped holes
  • Specifically designed for Elite E-1236VS Lathes
$2,335.71
$1,959.00
As low as $63/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$26,503.99
$21,419.00
As low as $423/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.