JET

  • Layout
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,337.14
$27,949.00
As low as $553/mo
View Details
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860 at Elite Metal Tools
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
$56,292.86
$45,799.00
As low as $906/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$56,081.26
$45,759.00
As low as $905/mo
View Details
Jet GHB-1340A With Collet Closer 321124 at Elite Metal Tools
Jet GHB-1340A With Collet Closer 321124
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$14,510.00
$11,899.00
As low as $386/mo
View Details
Jet GH-1440ZX, 3-1/8" Spindle Bore Geared Head Lathe 321910 at Elite Metal Tools
Jet GH-1440ZX, 3-1/8" Spindle Bore Geared Head Lathe 321910
  • One-piece cast iron base absorbs vibration allowing heavier cuts
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$30,775.71
$25,399.00
As low as $502/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,740.29
$30,719.00
As low as $607/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
$35,995.71
$29,299.00
As low as $579/mo
View Details
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890 at Elite Metal Tools
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
$57,249.68
$47,499.00
As low as $940/mo
View Details
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440 at Elite Metal Tools
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
$19,803.99
$16,099.00
As low as $318/mo
View Details
Jet GH-1660ZX, 3-1/8" Spindle Bore Geared Head Lathe 321940 at Elite Metal Tools
Jet GH-1660ZX, 3-1/8" Spindle Bore Geared Head Lathe 321940
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$34,252.86
$27,799.00
As low as $550/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$59,170.06
$48,459.00
As low as $959/mo
View Details
Jet GH-1640ZX, 3-1/8" Spindle Bore Geared Head Lathe 321930 at Elite Metal Tools
Jet GH-1640ZX, 3-1/8" Spindle Bore Geared Head Lathe 321930
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$32,517.14
$26,899.00
As low as $532/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
$17,886.99
$14,559.00
As low as $473/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$53,045.71
$43,399.00
As low as $858/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,221.71
$28,669.00
As low as $567/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
$17,886.99
$14,559.00
As low as $473/mo
View Details
Jet GH-2280ZX, 3-1/8" Spindle Bore Geared Head Lathe 321980 at Elite Metal Tools
Jet GH-2280ZX, 3-1/8" Spindle Bore Geared Head Lathe 321980
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$40,742.86
$32,999.00
As low as $653/mo
View Details
Jet EGH-1740 With Taper Attacment 892500 at Elite Metal Tools
Jet EGH-1740 With Taper Attacment 892500
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$47,717.14
$38,999.00
As low as $771/mo
View Details
Jet GH-1440-1 Lathe with DP700 DRO 323382 at Elite Metal Tools
Jet GH-1440-1 Lathe with DP700 DRO 323382
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,955.71
$19,699.00
As low as $389/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO 892507 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO 892507
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$50,274.29
$41,199.00
As low as $815/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$18,688.57
$15,199.00
As low as $300/mo
View Details
Jet E-1340VS, Elite 13x40 EVS Lathe 892020 at Elite Metal Tools
Jet E-1340VS, Elite 13x40 EVS Lathe 892020
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$23,855.91
$19,266.78
As low as $381/mo
View Details
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200 at Elite Metal Tools
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200
  • 3 double-end boring bars (3/8 x 6, 1/2 x 9 and 5/8 x 10)
  • Adjustable turning tool holder
  • HSS knurling tool with 3 pairs of knurls
  • MT3 half dead center and MT3 carbide-tipped dead center
  • MT3 heavy duty live center
$314.29
$274.00
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,054.57
$27,719.00
As low as $548/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.