JET

Jet E-1340VS With Newall DP700 DRO 892419

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

MSRP: ~~$27,765.69~~

$21,465

As low as $424.79/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894342

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$42,999.99~~

$33,225

As low as $657.52/mo

View Details

Jet PUC-41 x 26, Resin Utility Cart 141014

One piece handle and top shelve for long lasting durability
5 inch quiet, non-marking casters
Industrial-duty, resin design that resists dents, chips, scratches and corrosion
Rounded edges reduce damage to property and personnel
Backed by our industry leading 2-Year Warranty

MSRP: ~~$343.99~~

$235

View Details

Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$3,783.99~~

$2,175

As low as $70.68/mo

View Details

Jet JET — 400 Series Quick Change Tool Post 650305

Maximum rigidity for chatter-free performance
Holders fit ALLORRIS and YUASA tool posts
Completely sealed for maintenance free operation
Change tools in seconds
Fits 14" - 20" swing lathes

MSRP: ~~$1,203.99~~

$1,045

As low as $33.96/mo

View Details

Jet 2-HDT, 2-Ton Manual Trolley 262020

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$359.99~~

$245

View Details

Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$11,945.99~~

$6,725

As low as $218.56/mo

View Details

Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$38,454.29~~

$29,955

As low as $592.80/mo

View Details

Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091

Bimetal
5/8T
1" X .035" X 114-1/2"

MSRP: ~~$223.59~~

$215

View Details

Jet E-1340VS With Collet Closer 892401

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

MSRP: ~~$27,765.69~~

$21,470

As low as $424.89/mo

View Details

Jet E-1440VS With Collet Closer 892451

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Heavy-duty stand with full length foot brake

MSRP: ~~$29,239.99~~

$22,525

As low as $445.76/mo

View Details

Jet GH-1640ZX With ACU-RITE 203 DRO 321475

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

MSRP: ~~$49,634.29~~

$39,129

As low as $774.36/mo

View Details

Jet GH-1440-3 Lathe with Newall NMS300 DRO and Taper Attachment 323417

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

MSRP: ~~$33,662.79~~

$26,510

As low as $524.63/mo

View Details

Jet JET — 300 Series Quick Change Tool Post 650300

Maximum rigidity for chatter-free performance
Holders fit ALLORRIS and YUASA tool posts
Completely sealed for maintenance free operation
Change tools in seconds
Fits 13"-18" swing lathes

MSRP: ~~$909.09~~

$815

As low as $26.48/mo

View Details

Jet JET — Infeed Table for MBS-1323EVS 891171

18 f/min. maximum transfer speed
11" distance between rollers
Six rollers
50-300 SFPM Variable Speed
7716 lb Capacity load

MSRP: ~~$6,572.79~~

$5,115

As low as $166.23/mo

View Details

Jet JG-300, 3 Ton Grip Puller Without Cable 286530

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$1,253.99~~

$795

As low as $25.83/mo

View Details

Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$8,857.99~~

$4,945

As low as $160.71/mo

View Details

Jet GH-2680ZH With ACU-RITE 203 DRO 321863

12" 3 Jaw scroll chuck with top reversing jaws
2 Steady rests with roller bearings
Bed ways are induction hardened and ground for durability
E-Stop on Carriage for added safety
Electronic Chuck Key Holder

MSRP: ~~$76,466.29~~

$58,495

As low as $1,157.61/mo

View Details

Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

MSRP: ~~$34,399.99~~

$27,040

As low as $535.12/mo

View Details

Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$38,085.69~~

$29,690

As low as $587.56/mo

View Details

Jet BDB-1340A With Newall DP700 DRO 321130

6" 3-jaw direct mount scroll chuck with top reversing jaws
Automatic feeding and threading are fully interlocked
Carriage mounted spindle control lever
Centers and headstock center sleeves
Feed selectors travel in grooved ways

MSRP: ~~$16,708.59~~

$12,869

As low as $418.24/mo

View Details

Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894434

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$47,299.99~~

$37,450

As low as $741.13/mo

View Details

Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$310.99~~

$225

View Details

Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$4,175.99~~

$2,375

As low as $77.18/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.