JET

  • Layout
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,321.49
$4,762
As low as $154.76/mo
View Details
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,070.29
$676.50
As low as $21.98/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $26,352.80
$20,886
As low as $413.33/mo
View Details
On Sale
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $74,869.07
Was: $58,509
Now: $48,509
As low as $959.99/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $54,057.07
$43,218
As low as $855.28/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,574.49
$4,895
As low as $159.08/mo
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $321.19
$219
View Details
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $31,758.53
$25,675
As low as $508.10/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $50,678.53
$40,735
As low as $806.14/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,904
As low as $710.54/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,655
As low as $567.08/mo
View Details
Jet GH-1440-3 with NMS300 DRO 323415 at Elite Metal Tools
Jet GH-1440-3 with NMS300 DRO 323415
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,783.99
$3,034
As low as $98.60/mo
View Details
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315 at Elite Metal Tools
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,840.53
$38,939
As low as $770.60/mo
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $1,405.79
$878
As low as $28.53/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,384.29
$4,270
As low as $138.77/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,303.99
$4,228
As low as $137.41/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,515.99
$34,315
As low as $679.09/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,353.72
$32,727
As low as $647.66/mo
View Details
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301 at Elite Metal Tools
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Spindle utilizes class 7210 (P4, ABEC-7) precision angular bearings for the industry-leading spindle taper runout of 0.00012"
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,655
As low as $567.08/mo
View Details
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215 at Elite Metal Tools
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215
  • Quick-change tool post and 4 holders
  • HSS internal threading tool
  • Mt-2 live center; parting tool with HSS blade
  • 2-pc indexable turning tool (right and left hand)
  • Boring tool
$419
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $772.19
$518
As low as $16.83/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment 323401 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment 323401
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.