JET

  • Layout
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet EGH-1740 With Taper Attacment 892500 at Elite Metal Tools
Jet EGH-1740 With Taper Attacment 892500
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $55,678.80
$44,409
As low as $878.85/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,029.45
$33,223
As low as $657.48/mo
View Details
Jet BDB-1340A Lathe With Newall NMS300 DRO 323130 at Elite Metal Tools
Jet BDB-1340A Lathe With Newall NMS300 DRO 323130
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Helical cut headstock gears reduce noise
MSRP: $17,784.79
$13,936
As low as $452.92/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,002.26
$31,734
As low as $628.01/mo
View Details
Jet GH-1440-1 Lathe with DP700 DRO 323382 at Elite Metal Tools
Jet GH-1440-1 Lathe with DP700 DRO 323382
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,974.80
$26,570
As low as $525.82/mo
View Details
Jet JAT-411, 1/8" Right Angle Pencil Die Grinder 505411 at Elite Metal Tools
Jet JAT-411, 1/8" Right Angle Pencil Die Grinder 505411
  • 5' long whip hose for easy maneuverability
  • 90° head to easily access hard to reach areas
  • Comes with two wrenches for easy accessory changes
  • Kevlar rotor vanes to extend life and reduce maintenance
  • Lightweight aluminum housing
MSRP: $340.99
$247
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $63,652.26
$50,268
As low as $994.80/mo
View Details
Jet JAT-800A Lever Lock Needle Scaler 505802 at Elite Metal Tools
Jet JAT-800A Lever Lock Needle Scaler 505802
  • Easily convert tool from needle scaler to flux chipper
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes one set of 19 needles
  • Lever lock retainer permits quick tool change
  • Backed by the industry leading 2-Year Warranty
MSRP: $291.49
$219
View Details
Jet JAT-730, 5" Random Orbital Palm Sander 505730 at Elite Metal Tools
Jet JAT-730, 5" Random Orbital Palm Sander 505730
  • Ergonomically Designed Grip
  • Exhaust silencer provides quiet operation
  • Hook and loop sanding pads allow for rapid abrasive changes, reducing downtime
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Random orbit sander with a balanced sanding pad for swirl-free finishes
MSRP: $367.39
$247
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,948.53
$36,103
As low as $714.47/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Collet Closer 892509 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Collet Closer 892509
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $62,706.26
$49,573
As low as $981.04/mo
View Details
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860 at Elite Metal Tools
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $77,369.26
$60,495
As low as $1,197.19/mo
View Details
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225 at Elite Metal Tools
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225
  • Gun-smithing spider adds functionality to the JET GHB-1236 lathe
MSRP: $218.89
$206
View Details
Jet E-1340VS, Elite 13x40 EVS Lathe 892020 at Elite Metal Tools
Jet E-1340VS, Elite 13x40 EVS Lathe 892020
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $27,569.07
$21,780
As low as $431.02/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894366 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894366
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$33,124
As low as $655.52/mo
View Details
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440 at Elite Metal Tools
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
MSRP: $23,514.80
$18,799
As low as $372.03/mo
View Details
Jet JAT-107, 1/2" Compact Impact Wrench 505107 at Elite Metal Tools
Jet JAT-107, 1/2" Compact Impact Wrench 505107
  • 3 Position forward & reverse power settings
  • Aluminum construction
  • Compact design of 4-5/7" long for hard to reach or tight work spaces
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $301.39
$215
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $3,513.72
$2,835
As low as $92.13/mo
View Details
Jet JAT-105, 3/4" Impact Wrench 505105 at Elite Metal Tools
Jet JAT-105, 3/4" Impact Wrench 505105
  • Aluminum construction
  • Easily adjustable, 3-position forward power setting
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
MSRP: $874.49
$585
As low as $19.01/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO 323386 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO 323386
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet JAT-821A Lever Lock Flux Chipper 505822 at Elite Metal Tools
Jet JAT-821A Lever Lock Flux Chipper 505822
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes (1) wide angle chisel
  • Lever lock retainer permits quick tool change
  • Backed by the industry leading 2-Year Warranty
MSRP: $293.69
$219
View Details
Jet JAT-125, 3/8" Stubby Impact Wrench 505125 at Elite Metal Tools
Jet JAT-125, 3/8" Stubby Impact Wrench 505125
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Jumbo hammer clutch that brings high torque in a small package with extreme durability
  • One hand side-to-side forward/reverse for easy one hand operation
  • Unmatched balance to reduce fatigue over long usage
MSRP: $353.09
$249
View Details
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890 at Elite Metal Tools
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $80,139.72
$62,495
As low as $1,236.77/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.