JET

  • Layout
Jet JAT-821A Lever Lock Flux Chipper 505822 at Elite Metal Tools
Jet JAT-821A Lever Lock Flux Chipper 505822
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes (1) wide angle chisel
  • Lever lock retainer permits quick tool change
  • Backed by the industry leading 2-Year Warranty
MSRP: $293.69
$219
View Details
Jet JAT-125, 3/8" Stubby Impact Wrench 505125 at Elite Metal Tools
Jet JAT-125, 3/8" Stubby Impact Wrench 505125
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Jumbo hammer clutch that brings high torque in a small package with extreme durability
  • One hand side-to-side forward/reverse for easy one hand operation
  • Unmatched balance to reduce fatigue over long usage
MSRP: $353.09
$249
View Details
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890 at Elite Metal Tools
Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $80,139.72
$62,495
As low as $1,236.77/mo
View Details
Jet SJ-25T, 25-Ton Screw Jack 441325 at Elite Metal Tools
Jet SJ-25T, 25-Ton Screw Jack 441325
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $578.59
$425
View Details
Jet JAT-801, Needle Scaler 505801 at Elite Metal Tools
Jet JAT-801, Needle Scaler 505801
  • Ball lock retainer permits quick tool change
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Backed by the industry leading 2-Year Warranty
MSRP: $659.99
$478
View Details
Jet JAT-211, 1" D-Handle Impact Wrench 505211 at Elite Metal Tools
Jet JAT-211, 1" D-Handle Impact Wrench 505211
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Lightest tool in it's class
  • Lightweight aluminum clutch housing and handle for great durability and tool balance
  • Torque regulator switch and forward/reverse in one easy access switch
MSRP: $1,624.69
$1,061
As low as $34.48/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,136.53
$19,993
As low as $395.66/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,515.72
$30,641
As low as $606.38/mo
View Details
Jet EGH-1740 With Newall DP700 DRO 892511 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO 892511
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,435.72
$45,700
As low as $904.40/mo
View Details
Jet JAT-483, 4", 1 HP Extended Cut-Off Tool 505483 at Elite Metal Tools
Jet JAT-483, 4", 1 HP Extended Cut-Off Tool 505483
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Easy-to-use spindle lock system holds the cutting wheel when choosing one of 11 adjustable positions of the swivel guard
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Right-angle head design for reaching tight or angled grinding jobs
MSRP: $650.09
$478
View Details
Jet JAT-731, 6" Random Orbital Palm Sander 505731 at Elite Metal Tools
Jet JAT-731, 6" Random Orbital Palm Sander 505731
  • Ergonomically Designed Grip
  • Exhaust silencer provides quiet operation
  • Hook and loop sanding pads allow for rapid abrasive changes, reducing downtime
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Random orbit sander with a balanced sanding pad for swirl-free finishes
MSRP: $336.59
$245
View Details
On Sale
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050 at Elite Metal Tools
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,785.72
Was: $27,166
Now: $17,166
As low as $339.71/mo
View Details
Jet BDB-1340A With CBS-1340A Stand 321102AK at Elite Metal Tools
Jet BDB-1340A With CBS-1340A Stand 321102AK
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $15,406.26
$12,189
As low as $396.14/mo
View Details
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091 at Elite Metal Tools
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $85,545.45
$66,354
As low as $1,313.14/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JAT-126, 1/2" Composite Impact Wrench 505126 at Elite Metal Tools
Jet JAT-126, 1/2" Composite Impact Wrench 505126
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Lightweight aluminum clutch housing for great durability and tool balance
  • One hand side-to-side forward/reverse for easy one hand operation
  • Twin hammer clutch has all the power without all the vibration
MSRP: $397.09
$269
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,596.80
$31,436
As low as $622.11/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$31,336
As low as $620.13/mo
View Details
Jet JAT-108, 1" Pistol Grip Aluminum Impact Wrench 505108 at Elite Metal Tools
Jet JAT-108, 1" Pistol Grip Aluminum Impact Wrench 505108
  • Easy touch teasing trigger for great control throughout the torque range
  • Lightest tool in it's class
  • Lightweight aluminum housing
  • Nonslip molded rubber grip for additional comfort
  • Steel clutch housing for long life durability
MSRP: $1,127.49
$755
As low as $24.53/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$31,535
As low as $624.07/mo
View Details
On Sale
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,326.53
Was: $31,237
Now: $21,237
As low as $420.28/mo
View Details
Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481 at Elite Metal Tools
Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Extended design for additional reach
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $441.09
$291
View Details
On Sale
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,799.39
Was: $29,380
Now: $19,380
As low as $383.53/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,623.99
$32,925
As low as $651.58/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.