JET

  • Layout
On Sale
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,461.69
Was: $8,049
Now: $4,024.50
As low as $130.79/mo
View Details
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,267.39
$5,783
As low as $187.94/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $20,265.29
$11,185
As low as $363.51/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$38,636
As low as $764.60/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,529.80
$39,271
As low as $777.17/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,136.53
$19,675
As low as $389.36/mo
View Details
Jet JET — 200 Series Quick Change Tool Post Set 650295 at Elite Metal Tools
Jet JET — 200 Series Quick Change Tool Post Set 650295
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $837.86
$753
As low as $24.47/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,515.72
$30,165
As low as $596.96/mo
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,598.29
$989
As low as $32.14/mo
View Details
Jet EGH-1740 With Newall DP700 DRO 892511 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO 892511
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,435.72
$44,990
As low as $890.35/mo
View Details
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091 at Elite Metal Tools
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $85,545.45
$65,322
As low as $1,292.72/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $38,245.45
$29,970
As low as $593.10/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,303.99
$4,228
As low as $137.41/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,302.29
$7,450
As low as $242.12/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $34,596.53
$27,330
As low as $540.86/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,692.59
$8,685
As low as $282.26/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401 at Elite Metal Tools
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $655.59
$456
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$31,045
As low as $614.38/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,598.79
$4,383
As low as $142.44/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $26,352.80
$20,560
As low as $406.88/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,136.80
$23,295
As low as $461.00/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.