JET

  • Layout
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000 at Elite Metal Tools
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,308.29
$4,799
As low as $155.96/mo
View Details
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K at Elite Metal Tools
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,883.89
$9,589
As low as $311.64/mo
View Details
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800 at Elite Metal Tools
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $936.09
$621
As low as $20.18/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,112.89
$8,518
As low as $276.83/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,656
As low as $151.32/mo
View Details
Jet E-1440VS With Newall DP700 DRO 892469 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO 892469
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,515.45
$26,967
As low as $533.67/mo
View Details
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575 at Elite Metal Tools
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $659.99
$469
View Details
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501 at Elite Metal Tools
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,511.39
$935
As low as $30.38/mo
View Details
Jet E-1440VS With Taper Attachment and Collet Closer 892452 at Elite Metal Tools
Jet E-1440VS With Taper Attachment and Collet Closer 892452
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,542.53
$28,457
As low as $563.16/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$29,450
As low as $582.81/mo
View Details
Jet Coolant System with Switch and Tray for ELITE Mills 894094 at Elite Metal Tools
Jet Coolant System with Switch and Tray for ELITE Mills 894094
  • Accessory for JET ELITE Mills
MSRP: $1,891.99
$1,582
As low as $51.41/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,718.45
$30,790
As low as $609.33/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,574
As low as $446.73/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,507.69
$3,229
As low as $104.94/mo
View Details
Jet BDB-929 STAND 321377 at Elite Metal Tools
Jet BDB-929 STAND 321377
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-929 lathe
MSRP: $837.86
$756
As low as $24.57/mo
View Details
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,787.99
$57,695
As low as $1,141.78/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $43,651.07
$34,415
As low as $681.07/mo
View Details
Jet GH-26120ZH With ACU-RITE 203 DRO 321892 at Elite Metal Tools
Jet GH-26120ZH With ACU-RITE 203 DRO 321892
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $90,951.07
$70,495
As low as $1,395.09/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,704.53
$26,372
As low as $521.90/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,510.09
$8,202
As low as $266.56/mo
View Details
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K at Elite Metal Tools
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $18,490.99
$10,432
As low as $339.04/mo
View Details
Jet Coolant Tray For ELITE Mills 894093 at Elite Metal Tools
Jet Coolant Tray For ELITE Mills 894093
  • Accessory for JET ELITE Mills
MSRP: $1,148.72
$999
As low as $32.46/mo
View Details
Jet TS200-460-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144007K at Elite Metal Tools
Jet TS200-460-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144007K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,043.59
$8,481
As low as $275.63/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.