JET

  • Layout
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,543.07
$35,805
As low as $708.58/mo
View Details
Jet E-1340VS With Taper Attachment and Collet Closer 892402 at Elite Metal Tools
Jet E-1340VS With Taper Attachment and Collet Closer 892402
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,920.80
$27,265
As low as $539.57/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO 892453 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO 892453
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,326.26
$27,563
As low as $545.47/mo
View Details
Jet GH-1440B with Newall DP500 & Taper Attachment 323448 at Elite Metal Tools
Jet GH-1440B with Newall DP500 & Taper Attachment 323448
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $27,109.60
$21,442
As low as $424.33/mo
View Details
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291 at Elite Metal Tools
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
  • 26.6 x 12.7 x 9.8 in
  • Attachment length 18 in
MSRP: $6,216.53
$4,962
As low as $161.26/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,839.99
$30,145
As low as $596.56/mo
View Details
Jet E-1340VS With Newall DP700 DRO 892419 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO 892419
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894148 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894148
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,110.53
$34,018
As low as $673.21/mo
View Details
Jet GH-2680ZH With ACU-RITE 203 DRO 321863 at Elite Metal Tools
Jet GH-2680ZH With ACU-RITE 203 DRO 321863
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $84,112.92
$65,495
As low as $1,296.14/mo
View Details
Jet GH-1440-3 with 203 DRO and Collet Closer 323404 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO and Collet Closer 323404
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,975.07
$30,245
As low as $598.54/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO, Collet Closer and Taper Attachment 323385 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO, Collet Closer and Taper Attachment 323385
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,657
As low as $745.23/mo
View Details
Jet JET — Collet Closer CC-GHW for all Model W Lathes 321519 at Elite Metal Tools
Jet JET — Collet Closer CC-GHW for all Model W Lathes 321519
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
MSRP: $4,459.72
$3,599
As low as $116.96/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,756
As low as $747.19/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $51,894.80
$41,629
As low as $823.83/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894321 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894321
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,813.45
$35,999
As low as $712.42/mo
View Details
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $45,678.26
$35,905
As low as $710.55/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO 892415 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO 892415
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,055.99
$27,365
As low as $541.55/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,245.99
$38,948
As low as $770.78/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894122 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894122
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,799.80
$35,259
As low as $697.77/mo
View Details
Jet JET — 400 Series Quick Change Tool Post 650305 at Elite Metal Tools
Jet JET — 400 Series Quick Change Tool Post 650305
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 14" - 20" swing lathes
MSRP: $1,324.39
$1,142
As low as $37.11/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.