JET

  • Layout
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$37,854
As low as $749.13/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$34,555
As low as $683.84/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$34,760
As low as $687.90/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$31,827
As low as $629.85/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,029.07
$29,090
As low as $575.69/mo
View Details
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014 at Elite Metal Tools
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014
  • 5-C Collet Set
  • Precision ground components
  • 1/8" - 1-/16" by 1/16" increments
  • Does not include rack or case
$415
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,245.07
$26,353
As low as $521.52/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,326.80
$34,369
As low as $680.16/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO 892461 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO 892461
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,123.53
$26,988
As low as $534.09/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,326.26
$27,135
As low as $537.00/mo
View Details
Jet GH-1880ZX With Newall DP700 DRO With Taper Attachment 321571 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 DRO With Taper Attachment 321571
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,923.07
$56,695
As low as $1,121.99/mo
View Details
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292 at Elite Metal Tools
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
  • 30 x 7 x 7 in
MSRP: $7,162.53
$5,657
As low as $183.85/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $43,651.07
$33,880
As low as $670.48/mo
View Details
Jet E-1340VS With Taper Attachment 892400 at Elite Metal Tools
Jet E-1340VS With Taper Attachment 892400
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,082.80
$24,789
As low as $490.57/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.72
$33,587
As low as $664.68/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$38,636
As low as $764.60/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment 892462
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,718.45
$30,312
As low as $599.87/mo
View Details
Jet JET — Infeed Table for MBS-1323EVS 891162 at Elite Metal Tools
Jet JET — Infeed Table for MBS-1323EVS 891162
  • 7 Rollers
  • 78.7" x 25.2" Roller Capacity (LxW )
  • 27-1/2 - 30-1/8" Roller to Floor Height
  • 3968 lb. Capacity Load
  • Steel
MSRP: $3,216.39
$2,617
As low as $85.05/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,405
As low as $562.13/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,704.53
$25,950
As low as $513.55/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,596.53
$27,330
As low as $540.86/mo
View Details
Jet E-1440VS With Taper Attachment and Collet Closer 892452 at Elite Metal Tools
Jet E-1440VS With Taper Attachment and Collet Closer 892452
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,542.53
$28,015
As low as $554.41/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.