JET

  • Layout
Jet 10 x 18 Semi-Auto Variable Speed Dual Mitering Saw | EHB-1018VM 891070 at Elite Metal Tools
Jet 10 x 18 Semi-Auto Variable Speed Dual Mitering Saw | EHB-1018VM 891070
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Dual mitering allows for compound angle cutting of 60° right and 45° left
  • Heavy-duty construction reduces vibration and deflection
MSRP: $19,210.50
$14,895
As low as $484.08/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $34,596.53
$27,330
As low as $540.86/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$31,045
As low as $614.38/mo
View Details
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551 at Elite Metal Tools
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551
  • Heavy duty tables fold for better storage
  • Tables are adjustable to level with precision
  • Tables assist with longer boards
  • Hold up to 35 lbs each
  • Steel
MSRP: $371.57
$328
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $26,352.80
$20,560
As low as $406.88/mo
View Details
Jet ECB-1833DMEVS-230, 18 x 31" Semi-Automatic Dual Mitering EVS Bandsaw 230V, 3Ph 891170 at Elite Metal Tools
Jet ECB-1833DMEVS-230, 18 x 31" Semi-Automatic Dual Mitering EVS Bandsaw 230V, 3Ph 891170
  • Electronic variable speed from 50-297 SFPM
  • Heavy duty construction reduces vibration and deflection
  • Hydraulic assist descent control
  • Auto table swivel
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
MSRP: $72,368.99
$55,791
As low as $1,104.10/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,136.80
$23,295
As low as $461.00/mo
View Details
Jet Bed Extension for Jet JWL-1221VS 719201 at Elite Metal Tools
Jet Bed Extension for Jet JWL-1221VS 719201
$425
View Details
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,799.39
$28,924
As low as $572.40/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,326.53
$30,752
As low as $608.58/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,623.99
$32,414
As low as $641.47/mo
View Details
Jet GH-1440B with Newall NMS300 323446 at Elite Metal Tools
Jet GH-1440B with Newall NMS300 323446
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $24,501.39
$19,195
As low as $379.86/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894371 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894371
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,732.53
$39,418
As low as $780.08/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
On Sale
Jet GH-1880ZX, 3-1/8" Spindle Bore Geared Head Lathe 321970 at Elite Metal Tools
Jet GH-1880ZX, 3-1/8" Spindle Bore Geared Head Lathe 321970
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $54,057.07
Was: $42,395
Now: $33,916
As low as $671.19/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu_rite 203 DRO, Taper Attachment & Collet Closer,3HP 311447 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu_rite 203 DRO, Taper Attachment & Collet Closer,3HP 311447
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $35,407.45
$27,915
As low as $552.43/mo
View Details
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C at Elite Metal Tools
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C
  • Reduces air resistance to provide a 10 to 20 percent more CFM than conventional dust collectors
  • Includes a canister filter and 5 clear plastic collection bags
  • Transparent bags make it easy to tell when they are full
  • Designed for the 708640 DC 650A dust collector
$522
As low as $16.96/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894310 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894310
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,880.72
$31,876
As low as $630.82/mo
View Details
Jet GH-1880ZX Lathe With Newall DP700 DRO With Collet Closer 321583 at Elite Metal Tools
Jet GH-1880ZX Lathe With Newall DP700 DRO With Collet Closer 321583
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,152.85
$57,249
As low as $1,132.95/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,083.72
$36,778
As low as $727.83/mo
View Details
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200 at Elite Metal Tools
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200
  • 3 double-end boring bars (3/8 x 6, 1/2 x 9 and 5/8 x 10)
  • Adjustable turning tool holder
  • HSS knurling tool with 3 pairs of knurls
  • MT3 half dead center and MT3 carbide-tipped dead center
  • MT3 heavy duty live center
$410
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.