JET

Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill 351050

Easy to read internal depth gauge
Full power to the cutting tools through Variable Speed geared head
Heavy-duty design allows for a variety of precision drilling applications
Mill Drill Stand, p/n 350045, shown in some images, is optional
Milling table allows for movement

$10,014.29

$8,139.00

As low as $264/mo

View Details

Jet GH-1640ZX, 3-1/8" Spindle Bore Geared Head Lathe 321930

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$32,517.14

$26,899.00

As low as $532/mo

View Details

Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231

Compound and cross slide have backlash adjustment
Emergency stop within easy reach of the Operator
Enclosed gearbox design provides smooth, quiet operation
Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
Mounted on stand with foot pedal, coolant and ready to use

$17,886.99

$14,559.00

As low as $473/mo

View Details

Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

$53,045.71

$43,399.00

As low as $858/mo

View Details

Jet JMD-15 Mill/Drill With NEWALL DP700 DRO 350125

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read external depth gauge

$6,596.57

$5,344.99

As low as $173/mo

View Details

Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$11,202.68

$8,999.00

As low as $292/mo

View Details

Jet JTM-1254RVS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690020

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

$23,046.57

$18,759.00

As low as $371/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$35,221.71

$28,669.00

As low as $567/mo

View Details

Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,107.14

$6,689.00

As low as $217/mo

View Details

Jet JTM-1254VS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690025

Adjustable gibs throughout
Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
Certified Meehanite® castings
Dual locks on all moveable surfaces
Precision bored and honed milling head

$24,570.20

$19,999.00

As low as $395/mo

View Details

Jet JTM-1 Mill With X-Axis Powerfeed 690019

Heavy duty splined motor drive
Internal coolant tank built into base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system
Precision bored and honed milling head

$14,985.71

$12,249.00

As low as $398/mo

View Details

Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575

Adjustable gibs throughout
Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Internal coolant tank built into casting base

$48,711.63

$39,649.00

As low as $784/mo

View Details

Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230

Compound and cross slide have backlash adjustment
Emergency stop within easy reach of the Operator
Enclosed gearbox design provides smooth, quiet operation
Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
Mounted on stand with foot pedal, coolant and ready to use

$17,886.99

$14,559.00

As low as $473/mo

View Details

Jet GH-2280ZX, 3-1/8" Spindle Bore Geared Head Lathe 321980

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$40,742.86

$32,999.00

As low as $653/mo

View Details

Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,627.14

$7,099.00

As low as $230/mo

View Details

Jet EGH-1740 With Taper Attacment 892500

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

$47,717.14

$38,999.00

As low as $771/mo

View Details

Jet EGH-1740 With ACU-RITE 303 DRO 892507

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

$50,274.29

$41,199.00

As low as $815/mo

View Details

Jet JVM-836-3 Mill With X-Axis Powerfeed 690174

Graduated scale on column
Hardened and ground precision table
Head tilts left or right
High precision spindle bearings
Large Diameter quill is chromed

$12,678.57

$10,479.00

As low as $340/mo

View Details

Jet GH-1440-1 Lathe with DP700 DRO 323382

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

$23,955.71

$19,699.00

As low as $389/mo

View Details

Jet E-1340VS, Elite 13x40 EVS Lathe 892020

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

$23,855.91

$19,266.78

As low as $381/mo

View Details

Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115

6" 3-jaw direct mount chuck with top reversing jaw
Compound and cross slide have backlash elimination
Fast, easy speed changes
Hardened and ground gears are featured in the headstock and gearbox
Image shown with optional bench, p/n 321443AK

$18,688.57

$15,199.00

As low as $300/mo

View Details

Jet JMD-18 Mill/Drill With Newall DP700 DRO and X-Axis Table Powerfeed 350127

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,833.20

$7,189.00

As low as $233/mo

View Details

Jet JTM-949EVS/230 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690576

Adjustable gibs throughout
Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Internal coolant tank built into casting base

$56,553.08

$46,031.99

As low as $910/mo

View Details

Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 DRO 351140

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$10,477.35

$8,629.00

As low as $280/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.