JET

  • Layout
Jet J-7020, 10" x 16" Horizontal Bandsaw 414472 at Elite Metal Tools
Jet J-7020, 10" x 16" Horizontal Bandsaw 414472
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
$8,553.84
$6,989.00
As low as $227/mo
View Details
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467 at Elite Metal Tools
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467
  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
$5,625.71
$4,599.00
As low as $149/mo
View Details
Jet PUC-44x25, Resin Flat Top Utility Cart 141017 at Elite Metal Tools
Jet PUC-44x25, Resin Flat Top Utility Cart 141017
  • 5 inch quiet, non-marking casters
  • 500 pounds of carrying capacity
  • Handle includes built-in storage bins to hold smaller materials
  • Quiet, Non-Marking Casters
  • Backed by our industry leading 2-Year Warranty
$397.00
$269.99
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
$1,066.00
$681.00
As low as $22/mo
View Details
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461 at Elite Metal Tools
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
$1,732.34
$1,399.00
As low as $45/mo
View Details
Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469 at Elite Metal Tools
Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
  • Electronically controlled blade speed from 82 - 330 SFPM
$8,088.57
$6,599.00
As low as $214/mo
View Details
Jet MBS-1014W-1, 10" x 14" Horizontal Mitering Bandsaw 414479 at Elite Metal Tools
Jet MBS-1014W-1, 10" x 14" Horizontal Mitering Bandsaw 414479
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
$10,195.71
$8,299.00
As low as $269/mo
View Details
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499 at Elite Metal Tools
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
$8,806.83
$7,230.99
As low as $235/mo
View Details
Jet J-7020M, 10" x 16" Horizontal Mitering Bandsaw 414474 at Elite Metal Tools
Jet J-7020M, 10" x 16" Horizontal Mitering Bandsaw 414474
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$11,685.71
$9,569.00
As low as $310/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$1,384.00
$883.00
As low as $28/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$5,642.00
$3,596.00
As low as $116/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$5,868.00
$3,749.00
As low as $121/mo
View Details
Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475 at Elite Metal Tools
Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
  • Auxiliary roller support on back of vise
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Circulating coolant system through both blade guides
$20,024.29
$16,299.00
As low as $322/mo
View Details
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
$10,195.71
$8,299.00
As low as $269/mo
View Details
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$7,028.00
$4,486.98
As low as $145/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$6,552.00
$4,110.20
As low as $133/mo
View Details
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484 at Elite Metal Tools
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$12,239.52
$9,999.00
As low as $324/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$17,510.00
$14,289.00
As low as $464/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476-4 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476-4
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$17,510.00
$14,289.00
As low as $464/mo
View Details
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475 at Elite Metal Tools
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$11,685.71
$9,569.00
As low as $310/mo
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$6,408.00
$4,086.00
As low as $132/mo
View Details
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,322.00
$847.99
As low as $27/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$13,095.00
$8,213.99
As low as $266/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$10,008.00
$6,386.00
As low as $207/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.