JET

  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $6,567.87
$5,220
As low as $169.65/mo
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,959.53
$1,635
As low as $53.13/mo
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
MSRP: $9,892.40
$7,799
As low as $253.46/mo
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $20,744.45
$16,265
As low as $321.88/mo
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $13,919.72
$10,999
As low as $357.46/mo
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $1,040.59
$929
As low as $30.19/mo
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $247.27
$236
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
MSRP: $228.35
$215
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
MSRP: $294.57
$280
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,391.93
$1,192
As low as $38.74/mo
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $810.80
$724
As low as $23.53/mo
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $263.55
$239
  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.