JET

Jet HD-5T, 5-Ton Wide Beam Clamp 202750

Clamp jaw is designed to distribute the load away from the beam flange edge
Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
Complies with ANSI / ASME B30.17 and B30.20 standards
Load tested to 125% of capacity with certificate
Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility

MSRP: ~~$276~~

$189

View Details

Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$926~~

$590.58

As low as $19.19/mo

View Details

Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
Patented 3-Jaw vise with rapid action moveable jaw for faster set up
Swing away control panel houses major saw controls

MSRP: ~~$8,806.83~~

$7,230.99

As low as $235.00/mo

View Details

Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475

Automatic blade breakage sensor detects accidental breakage and interrupts the power
Auxiliary roller support on back of vise
Blade is fully guarded for Operator safety
Built-in, self-propelled blade brush prevents chip build up in blade guides
Circulating coolant system through both blade guides

MSRP: ~~$20,024.29~~

$16,299

As low as $322.55/mo

View Details

Jet HBS-1220MSA, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw 424476

Automatic blade breakage sensor detects accidental breakage and interrupts the power
Auxiliary roller support on back of vise
Blade is fully guarded for Operator safety
Built-in, self-propelled blade brush prevents chip build up in blade guides
Circulating coolant system through both blade guides

MSRP: ~~$19,164.23~~

$15,599

As low as $308.70/mo

View Details

Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457

Adjustable Material Stop
Ball bearing supported blade wheel
Deluxe enclosed stand with wheels and handle for easy movement
Fully adjustable hydraulic downfeed system
Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured

MSRP: ~~$1,652.11~~

$1,335

As low as $43.38/mo

View Details

Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$1,358~~

$865.98

As low as $28.14/mo

View Details

Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides feature parallel double-row ball bearing support
Coolant is distributed through the blade guides
Electronically controlled blade speed from 82 - 330 SFPM

MSRP: ~~$8,088.57~~

$6,599

As low as $214.46/mo

View Details

Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$6,408~~

$4,086

As low as $132.79/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$11,194~~

$7,021.16

As low as $228.18/mo

View Details

Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides with roller bearings
Coolant is distributed through the blade guides
Fully adjustable hydraulic downfeed with separate on/off control valve

MSRP: ~~$10,195.71~~

$8,299

As low as $269.71/mo

View Details

Jet 3-HDT, 3-Ton Manual Trolley 262030

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$656~~

$455

View Details

Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430

30' power cord length to match an electric hoist with 30' lift
4-button controller for electric hoist and trolley with 4-pin quick-connect plug
Push button controller with cable strain relief system for durability and reliability

MSRP: ~~$326~~

$215

View Details

Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

MSRP: ~~$17,510~~

$14,289

As low as $464.39/mo

View Details

Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558

Front legs feature leveling pads
Fully adjustable ball bearing blade guides
Hardened Ferrous 82-130 SFPM
Quick speed changes with the turn of a dial, no more belt changes
Variable Speed gives you the ability to cut various material

MSRP: ~~$1,701.14~~

$1,379

As low as $44.81/mo

View Details

Jet J-3130, 5" x 8" Horizontal Bandsaw 414461

Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
Adjustable Material Stop
Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
Blade guides with side eccentric shaft with ball bearings
Fully adjustable hydraulic downfeed system

MSRP: ~~$1,732.34~~

$1,399

As low as $45.46/mo

View Details

Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467

Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
Adjustable Material Stop
Convenient control panel with overload protection
Fully adjustable hydraulic downfeed system
Heavy-duty cast iron saw head and sturdy base

MSRP: ~~$5,625.71~~

$4,599

As low as $149.46/mo

View Details

Jet 10" x 16" Horizontal Bandsaw | J-7040 414478

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
Patented 3-Jaw vise with rapid action moveable jaw for faster set up
Swing away control panel houses major saw controls

MSRP: ~~$8,553.84~~

$6,989

As low as $227.14/mo

View Details

Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

MSRP: ~~$11,685.71~~

$9,569

As low as $310.99/mo

View Details

Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$4,634~~

$2,650.99

As low as $86.15/mo

View Details

Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$664~~

$455

View Details

Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$6,634~~

$4,228

As low as $137.41/mo

View Details

Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$5,868~~

$3,749

As low as $121.84/mo

View Details

Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$5,642~~

$3,596

As low as $116.87/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.