JET

Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003

Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
Adjustable dust deflector and dust chute
Cast iron construction
Deluxe miter gauge that turns and locks for common angles, 45° both left and right
Heavy-duty steel base and rubber feet

$735.71

$650.00

As low as $21/mo

View Details

Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467

Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
Adjustable Material Stop
Convenient control panel with overload protection
Fully adjustable hydraulic downfeed system
Heavy-duty cast iron saw head and sturdy base

$5,625.71

$4,599.00

As low as $149/mo

View Details

Jet JBG-8W Shop Grinder with Grinding Wheel and Wire Wheel 577128

Adjustable Tool Rest
Cast iron wheel guard
Cast iron wheel guards dust chutes
Crimped Wire wheel included
Rubber mounts prevents movement

$467.14

$454.00

View Details

Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634

9" aluminum disc reduces heat buildup and prolongs abrasive life
Cast iron work rests with tool-less adjustments
Contact wheel grinding with toolless access
Easy-to-use belt tracking.
Full guarding of all non-work contact points

$1,038.51

$910.00

As low as $29/mo

View Details

Jet J-3130, 5" x 8" Horizontal Bandsaw 414461

Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
Adjustable Material Stop
Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
Blade guides with side eccentric shaft with ball bearings
Fully adjustable hydraulic downfeed system

$1,732.34

$1,399.00

As low as $45/mo

View Details

Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides feature parallel double-row ball bearing support
Coolant is distributed through the blade guides
Electronically controlled blade speed from 82 - 330 SFPM

$8,088.57

$6,599.00

As low as $214/mo

View Details

Jet IBG-10SSB 10" Industrial Buffer 578410

CSA/CUS Certified
Heavy Cast Iron Bases
Oversized motor shafts, heavy retainer plates and massive lock nuts.
Safety switch with removable key
The wide range of spacer options allow you to run a huge variety of finishing wheels.

$811.20

$735.00

As low as $23/mo

View Details

Jet MBS-1014W-1, 10" x 14" Horizontal Mitering Bandsaw 414479

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides with roller bearings
Coolant is distributed through the blade guides
Fully adjustable hydraulic downfeed with separate on/off control valve

$10,195.71

$8,299.00

As low as $269/mo

View Details

Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126

Adjustable Tool Rest
Cast iron wheel guard
Cast iron wheel guards dust chutes
Crimped Wire wheel included
Rubber mounts prevents movement

$352.86

$303.00

View Details

Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
Patented 3-Jaw vise with rapid action moveable jaw for faster set up
Swing away control panel houses major saw controls

$8,806.83

$7,230.99

As low as $235/mo

View Details

Jet J-7020M, 10" x 16" Horizontal Mitering Bandsaw 414474

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

$11,685.71

$9,569.00

As low as $310/mo

View Details

Jet JBG-10A/JBG-10B, 10" Shop Bench Grinder and JPS-2A Stand 577103K

$968.57

$848.00

As low as $27/mo

View Details

Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides with roller bearings
Coolant is distributed through the blade guides
Fully adjustable hydraulic downfeed with separate on/off control valve

$10,195.71

$8,299.00

As low as $269/mo

View Details

Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475

Automatic blade breakage sensor detects accidental breakage and interrupts the power
Auxiliary roller support on back of vise
Blade is fully guarded for Operator safety
Built-in, self-propelled blade brush prevents chip build up in blade guides
Circulating coolant system through both blade guides

$20,024.29

$16,299.00

As low as $322/mo

View Details

Jet JET — Replacement Filter for JDC-500 Dust Collector, Pair 414705

99% efficient at 5 Microns
Replacement filters for JDC-501 (pair)
Specifically designed for Metalworking dust collection

$512.86

$487.00

View Details

Jet JET — Buffer Dust Shroud, 8 in 578400

Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets

$465.71

$453.00

View Details

Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

$12,239.52

$9,999.00

As low as $324/mo

View Details

Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

$17,510.00

$14,289.00

As low as $464/mo

View Details

Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476-4

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

$17,510.00

$14,289.00

As low as $464/mo

View Details

Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath

$11,685.71

$9,569.00

As low as $310/mo

View Details

Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602

Easy to read scale shows exact degree of table tilt
Fully machined balanced disc runs vibration free
Heavy duty one piece steel stand
Large cast iron slotted table
Optimum speed of 1960 RPM, which is ideal for both metal and wood finishing

$2,145.37

$1,759.00

As low as $57/mo

View Details

Jet J-4421-4, 20" Disc Grinder 460V 3Ph 577011

Extra large tilting table
Extra large tilting table lowers completely below disc for use of the entire disc surface
Low voltage protection switch
Precision table raiser utilizes a rack and gear mechanism for effortless operation
Rigid column and heavy duty base

$4,439.31

$3,619.00

As low as $117/mo

View Details

Jet 10" x 16" Horizontal Bandsaw | J-7040 414478

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
Patented 3-Jaw vise with rapid action moveable jaw for faster set up
Swing away control panel houses major saw controls

$8,553.84

$6,989.00

As low as $227/mo

View Details

Jet J-4301A, 6" x 48" Industrial Belt Finishing Machine 3Ph 414601

Adjustable dust deflector and dust chute
Adjustable, heavy-duty, cast iron removable platen
Belt head adjusts vertically and horizontally
Completely enclosed drums and guarded sanding belt
Fine thread adjustments for simple and easy belt tracking

$2,911.38

$2,379.00

As low as $77/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.