JET

Jet JG-300A, 3 Ton Grip Puller with Cable 286530K

Double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch, or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$1,643.99~~

$1,040

As low as $33.80/mo

View Details

Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$5,195.99~~

$2,920

As low as $94.90/mo

View Details

Jet 5-HDT, 5-Ton Manual Trolley 262050

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$1,026.99~~

$645

As low as $20.96/mo

View Details

Jet JHJ-60, 60-Ton Hydraulic Bottle Jack 453360K

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$1,513.99~~

$939

As low as $30.51/mo

View Details

Jet JTJ-10ST, 10 Ton-Hydraulic Toe Jack 454510

Complies with ANSI/ASME B30.1 standards
Convenient swivel socket for multi-directional use
Dual purpose jack designed for low or high clearances increases versatility
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Heat treated piston resists corrosion

MSRP: ~~$1,403.99~~

$885

As low as $28.76/mo

View Details

Jet AHJ-20, 20-Ton Air / Hydraulic Bottle Jack 456620

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Labor saving air pump that connects to a pneumatic source for increased lifting speed
Lifting, pushing, spreading, bending, pressing or straightening capabilities
Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use

MSRP: ~~$778.99~~

$529

As low as $17.19/mo

View Details

Jet SJ-25T, 25-Ton Screw Jack 441325

Complies with ANSI/ASME B30.1 standards
Corrugated Pivoting Head
Corrugated pivoting head, contours to the load providing maximum surface contact
Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
Improved design requires less effort to lift a maximum capacity load

MSRP: ~~$525.99~~

$330

View Details

Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229

315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Blade drive reduction gearbox operates in an oil bath for increased durability
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

MSRP: ~~$4,349.09~~

$3,475

As low as $112.93/mo

View Details

Jet CS-275, 275mm Ferrous Manual Cold Saw 414226

Blade drive reduction gearbox operates in an oil bath for increased durability
Cast iron frame
Flood coolant system
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production

MSRP: ~~$3,857.69~~

$3,115

As low as $101.23/mo

View Details

Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502

Complies with ANSI/ASME B30.1 standards
Dual purpose jack designed for low or high clearances increases versatility
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Heat treated piston resists corrosion
Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use

MSRP: ~~$529.99~~

$335

View Details

Jet HD-5T, 5-Ton Wide Beam Clamp 202750

Clamp jaw is designed to distribute the load away from the beam flange edge
Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
Complies with ANSI / ASME B30.17 and B30.20 standards
Load tested to 125% of capacity with certificate
Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility

MSRP: ~~$291.99~~

$199

View Details

Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$1,452.99~~

$899

As low as $29.21/mo

View Details

Jet RCB-25 Rebar Cutter & Bender 5/8" Capacity 220025

Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
Easier cutting with the needle bearing design reduces operator fatigue
High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
Mountable on a board or floor allows for one-handed operation
Backed by our industry leading 1-Year Warranty

MSRP: ~~$1,042.99~~

$665

As low as $21.61/mo

View Details

Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K

30" adjustable length material stop
350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Double self-centering vise with adjustable gibs secures the material for burr free cuts
Flood style coolant with flow control system extends blade life
Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform

MSRP: ~~$10,516.59~~

$8,175

As low as $265.68/mo

View Details

Jet 315mm Ferrous Manual Cold Saw | CS-315 414227

Blade drive reduction gearbox operates in an oil bath for increased durability
Cast iron frame
Flood coolant system
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production

MSRP: ~~$4,164.79~~

$3,330

As low as $108.22/mo

View Details

Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$579.99~~

$430

View Details

Jet 3-HDT, 3-Ton Manual Trolley 262030

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$701.99~~

$489

View Details

Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430

30' power cord length to match an electric hoist with 30' lift
4-button controller for electric hoist and trolley with 4-pin quick-connect plug
Push button controller with cable strain relief system for durability and reliability

MSRP: ~~$130.99~~

$125

View Details

Jet SJ-20T, 20-Ton Screw Jack 441320

Complies with ANSI/ASME B30.1 standards
Corrugated Pivoting Head
Corrugated pivoting head, contours to the load providing maximum surface contact
Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
Improved design requires less effort to lift a maximum capacity load

MSRP: ~~$404.99~~

$275

View Details

Jet J-FK350-2K, 350mm Ferrous Manual Cold Saw 414214K

30" adjustable length material stop
350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Double self-centering vise with adjustable gibs secures the material for burr free cuts
Flood style coolant with flow control system extends blade life
Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform

MSRP: ~~$10,123.39~~

$7,859

As low as $255.41/mo

View Details

Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$5,099.99~~

$2,869

As low as $93.24/mo

View Details

Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228

275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Blade drive reduction gearbox operates in an oil bath for increased durability
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

MSRP: ~~$4,054.29~~

$3,265

As low as $106.11/mo

View Details

Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$782.99~~

$530

As low as $17.22/mo

View Details

Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$365.99~~

$255

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.