JET

Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$7,794.99~~

$4,395

As low as $142.83/mo

View Details

Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$782.99~~

$530

As low as $17.22/mo

View Details

Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$6,712.99~~

$3,845

As low as $124.96/mo

View Details

Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$6,907.99~~

$3,945

As low as $128.21/mo

View Details

Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$14,137.99~~

$7,840

As low as $254.80/mo

View Details

Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K

30" adjustable length material stop
350mm (14") Non-Ferrous High Speed Cold Saw
Double self-centering vise with adjustable gibs secures the material for burr free cuts
High-Speed NF-350mm Blade included
Pneumatic Mist Coolant System

MSRP: ~~$10,565.69~~

$8,199

As low as $266.46/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$7,082.99~~

$4,025

As low as $130.81/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$6,639.99~~

$3,795

As low as $123.33/mo

View Details

Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$13,162.99~~

$7,340

As low as $238.55/mo

View Details

Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K

30" adjustable length material stop
Double self-centering vise with adjustable gibs secures the material for burr free cuts
High-Speed NF-350mm Blade included
Pneumatic Mist Coolant System
Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety

MSRP: ~~$10,319.99~~

$8,025

As low as $260.81/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$12,271.99~~

$6,880

As low as $223.60/mo

View Details

Jet 1-Ton Electric Chain Hoist 3-Phase 15' Lift | 1SS-3C-15 131500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$5,440.99~~

$3,140

As low as $102.05/mo

View Details

Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

MSRP: ~~$386.99~~

$255

View Details

Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$969.99~~

$625

As low as $20.31/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift | S90-150-10 101920

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$494.99~~

$305

View Details

Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421

24 volt push button controller with cable strain relief system for durability and reliability
4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
Complies with NEMA 4X standards
NEMA 4x-rated control pendant
Push button controller with cable strain relief system for durability and reliability

MSRP: ~~$229.99~~

$175

View Details

Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$9,028.99~~

$5,025

As low as $163.31/mo

View Details

Jet 1-Ton Electric Chain Hoist 3-Phase 20' Lift | 1SS-3C-20 132000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$5,617.99~~

$3,219

As low as $104.61/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$6,479.99~~

$3,719

As low as $120.86/mo

View Details

Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$3,783.99~~

$2,175

As low as $70.68/mo

View Details

Jet 2-HDT, 2-Ton Manual Trolley 262020

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$359.99~~

$245

View Details

Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$11,945.99~~

$6,725

As low as $218.56/mo

View Details

Jet JG-300, 3 Ton Grip Puller Without Cable 286530

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$1,253.99~~

$795

As low as $25.83/mo

View Details

Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$8,857.99~~

$4,945

As low as $160.71/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.