JET

Jet 5-HDT, 5-Ton Manual Trolley 262050

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

$960.00

$617.10

As low as $20/mo

View Details

Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,764.00

$1,128.99

As low as $36/mo

View Details

Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229

315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Blade drive reduction gearbox operates in an oil bath for increased durability
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

$4,133.92

$3,359.00

As low as $109/mo

View Details

Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$7,656.00

$4,879.99

As low as $158/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$5,666.00

$3,618.00

As low as $117/mo

View Details

Jet 315mm Ferrous Manual Cold Saw | CS-315 414227

Blade drive reduction gearbox operates in an oil bath for increased durability
Cast iron frame
Flood coolant system
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production

$3,930.00

$3,199.00

As low as $103/mo

View Details

Jet CS-275, 275mm Ferrous Manual Cold Saw 414226

Blade drive reduction gearbox operates in an oil bath for increased durability
Cast iron frame
Flood coolant system
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production

$3,670.81

$2,989.00

As low as $97/mo

View Details

Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228

275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Blade drive reduction gearbox operates in an oil bath for increased durability
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

$3,831.66

$3,119.00

As low as $101/mo

View Details

Jet JG-300A, 3 Ton Grip Puller with Cable 286530K

Double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch, or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$1,384.00

$883.00

As low as $28/mo

View Details

Jet J-FK350-2K, 350mm Ferrous Manual Cold Saw 414214K

30" adjustable length material stop
350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Double self-centering vise with adjustable gibs secures the material for burr free cuts
Flood style coolant with flow control system extends blade life
Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform

$9,592.86

$7,799.00

As low as $253/mo

View Details

Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,642.00

$3,596.00

As low as $116/mo

View Details

Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,868.00

$3,749.00

As low as $121/mo

View Details

Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$7,028.00

$4,486.98

As low as $145/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$6,552.00

$4,110.20

As low as $133/mo

View Details

Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$6,408.00

$4,086.00

As low as $132/mo

View Details

Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K

30" adjustable length material stop
350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Double self-centering vise with adjustable gibs secures the material for burr free cuts
Flood style coolant with flow control system extends blade life
Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform

$9,938.88

$8,079.00

As low as $262/mo

View Details

Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,322.00

$847.99

As low as $27/mo

View Details

Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$13,095.00

$8,213.99

As low as $266/mo

View Details

Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$10,008.00

$6,386.00

As low as $207/mo

View Details

Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$926.00

$590.58

As low as $19/mo

View Details

Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$7,702.00

$4,915.00

As low as $159/mo

View Details

Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

$904.00

$590.58

As low as $19/mo

View Details

Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K

30" adjustable length material stop
350mm (14") Non-Ferrous High Speed Cold Saw
Double self-centering vise with adjustable gibs secures the material for burr free cuts
High-Speed NF-350mm Blade included
Pneumatic Mist Coolant System

$9,861.94

$8,179.00

As low as $265/mo

View Details

Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

$4,634.00

$2,650.99

As low as $86/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.