JET

  • Layout
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003 at Elite Metal Tools
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172 at Elite Metal Tools
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229 at Elite Metal Tools
Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229
  • 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
MSRP: $4,133.92
$3,359
As low as $109.16/mo
View Details
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009 at Elite Metal Tools
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175 at Elite Metal Tools
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet CS-275, 275mm Ferrous Manual Cold Saw 414226 at Elite Metal Tools
Jet CS-275, 275mm Ferrous Manual Cold Saw 414226
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $3,670.81
$2,989
As low as $97.14/mo
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $276
$189
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,358
$865.98
As low as $28.14/mo
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $656
$455
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $326
$215
View Details
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227 at Elite Metal Tools
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $3,930
$3,199
As low as $103.96/mo
View Details
Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K at Elite Metal Tools
Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K
  • 30" adjustable length material stop
  • 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • Flood style coolant with flow control system extends blade life
  • Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform
MSRP: $9,938.88
$8,079
As low as $262.56/mo
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228 at Elite Metal Tools
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228
  • 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
MSRP: $3,831.66
$3,119
As low as $101.36/mo
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,634
$2,650.99
As low as $86.15/mo
View Details
Jet J-FK350-2K, 350mm Ferrous Manual Cold Saw 414214K at Elite Metal Tools
Jet J-FK350-2K, 350mm Ferrous Manual Cold Saw 414214K
  • 30" adjustable length material stop
  • 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • Flood style coolant with flow control system extends blade life
  • Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform
MSRP: $9,592.86
$7,799
As low as $253.46/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $664
$455
View Details
Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K at Elite Metal Tools
Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K
  • 30" adjustable length material stop
  • 350mm (14") Non-Ferrous High Speed Cold Saw
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
MSRP: $9,861.94
$8,179
As low as $265.81/mo
View Details
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K at Elite Metal Tools
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K
  • 30" adjustable length material stop
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
  • Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
MSRP: $9,668.57
$8,029
As low as $260.94/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.