JET

  • Layout
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,594.29
$29,340
As low as $580.63/mo
View Details
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112 at Elite Metal Tools
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $18,059.99
$13,845
As low as $449.96/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $23,342.79
$18,285
As low as $361.86/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,997.09
$28,190
As low as $557.88/mo
View Details
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Collet Closer 323416 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Collet Closer 323416
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,348.59
$29,159
As low as $577.05/mo
View Details
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155 at Elite Metal Tools
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $761.69
$685
As low as $22.26/mo
View Details
Jet GH-1440-3 with NMS300 DRO 323415 at Elite Metal Tools
Jet GH-1440-3 with NMS300 DRO 323415
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $29,485.69
$22,699
As low as $449.21/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,119.99
$28,275
As low as $559.56/mo
View Details
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190 at Elite Metal Tools
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190
$215
View Details
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581
  • 6” 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $20,025.69
$15,399
As low as $304.74/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $23,957.09
$18,725
As low as $370.56/mo
View Details
Jet E-1236VS With Newall DP700 DRO 892319 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO 892319
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $23,219.99
$18,195
As low as $360.07/mo
View Details
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $68,062.79
$52,385
As low as $1,036.69/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $28,994.29
$22,350
As low as $442.30/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,611.39
$28,630
As low as $566.58/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,399.99
$27,040
As low as $535.12/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,034.29
$31,815
As low as $629.61/mo
View Details
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442 at Elite Metal Tools
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
MSRP: $4,054.29
$3,249
As low as $105.59/mo
View Details
Jet Spider for 2" Spindle Bore 650226 at Elite Metal Tools
Jet Spider for 2" Spindle Bore 650226
  • Gun-smithing spider adds functionality to the JET GH-1440B lathe
$210
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,557.09
$25,715
As low as $508.89/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,874.29
$28,099
As low as $556.07/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $22,974.29
$17,529
As low as $346.89/mo
View Details
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $28,871.39
$22,259
As low as $440.50/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $28,502.79
$21,995
As low as $435.28/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.