JET

  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $995.03
$870
As low as $28.27/mo
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $3,595.71
$2,989
As low as $97.14/mo
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $1,344
$861.99
As low as $28.01/mo
  • Complies with ANSI/ASME B30.1 standards
  • Convenient swivel socket for multi-directional use
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
MSRP: $1,194
$766
As low as $24.89/mo
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $1,696.69
$1,429
As low as $46.44/mo
  • Easy to change air filter
  • Easy to empty clean-out drawer
  • Non-sparking aluminum housing and fan blade
  • Not to be used with Surface Grinders
  • Portable on 4 casters and 2 handles for ease of movement
MSRP: $2,461.43
$2,018
As low as $65.58/mo
  • Any brand bench top belt, disc or combination machine can be mounted using the optional Universal Adapter Plate (414830)
  • Chips and dust collect into a metal drawer that is easy to empty, and the high temperature filters are replaceable
  • CSA/CUS Certified
  • Four Adjustable Leveling Pads
  • Heavy-Duty 16 gauge steel construction
MSRP: $1,831.43
$1,509
As low as $49.04/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Labor saving air pump that connects to a pneumatic source for increased lifting speed
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $664
$459
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $445
$296.99
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $450
$288
  • Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
  • Easier cutting with the needle bearing design reduces operator fatigue
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Mountable on a board or floor allows for one-handed operation
  • Backed by our industry leading 1-Year Warranty
MSRP: $1,152.50
$593
As low as $19.27/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $513
$327.99
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $344
$225
  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
MSRP: $512.86
$487
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $328
$216
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $764
$511
As low as $16.60/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $234
$167
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Labor saving air pump that connects to a pneumatic source for increased lifting speed
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $544
$389
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $234
$167
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $328
$216
  • Flexible
  • For temperatures up to 130 degrees F
  • 8 ft length
  • Hose dia 3 in.
MSRP: $301.60
$269
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $250
$175

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.