JET

  • Layout
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000 at Elite Metal Tools
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,308.29
$4,799
As low as $155.96/mo
View Details
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K at Elite Metal Tools
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,883.89
$9,589
As low as $311.64/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $29,190.80
$22,972
As low as $454.61/mo
View Details
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800 at Elite Metal Tools
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $936.09
$621
As low as $20.18/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,112.89
$8,518
As low as $276.83/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,656
As low as $151.32/mo
View Details
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575 at Elite Metal Tools
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $659.99
$469
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,379.07
$10,558
As low as $343.13/mo
View Details
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501 at Elite Metal Tools
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,511.39
$935
As low as $30.38/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,096.07
$21,432
As low as $424.13/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds 690537
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,231.53
$26,024
As low as $515.01/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,379.72
$18,702
As low as $370.11/mo
View Details
Jet PUC-31x17, Resin Utility Cart 140018 at Elite Metal Tools
Jet PUC-31x17, Resin Utility Cart 140018
  • Compatible with Knaack Model CA-02 Cart Armour
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • Quiet, non-marking 5 inch casters for increased maneuverability
  • Rounded edges reduce damage to property and personnel
MSRP: $378.39
$243
View Details
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504 at Elite Metal Tools
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210 at Elite Metal Tools
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,649.99
$18,900
As low as $374.03/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,974.53
$22,078
As low as $436.92/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,110.26
$30,344
As low as $600.50/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,068.07
$7,995
As low as $259.83/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698143 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698143
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,894.26
$33,124
As low as $655.52/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,507.69
$3,229
As low as $104.94/mo
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,136.53
$19,993
As low as $395.66/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.