JET

  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $995.03
$870
As low as $28.27/mo
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $3,595.71
$2,989
As low as $97.14/mo
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $1,696.69
$1,429
As low as $46.44/mo
  • Easy to change air filter
  • Easy to empty clean-out drawer
  • Non-sparking aluminum housing and fan blade
  • Not to be used with Surface Grinders
  • Portable on 4 casters and 2 handles for ease of movement
MSRP: $2,461.43
$2,018
As low as $65.58/mo
  • Any brand bench top belt, disc or combination machine can be mounted using the optional Universal Adapter Plate (414830)
  • Chips and dust collect into a metal drawer that is easy to empty, and the high temperature filters are replaceable
  • CSA/CUS Certified
  • Four Adjustable Leveling Pads
  • Heavy-Duty 16 gauge steel construction
MSRP: $1,831.43
$1,509
As low as $49.04/mo
  • Gun-smithing spider adds functionality to the JET GHB-1236 lathe
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $2,818.57
$2,299
As low as $74.71/mo
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
  • 3 double-end boring bars (3/8 x 6, 1/2 x 9 and 5/8 x 10)
  • Adjustable turning tool holder
  • HSS knurling tool with 3 pairs of knurls
  • MT3 half dead center and MT3 carbide-tipped dead center
  • MT3 heavy duty live center
MSRP: $314.29
$274
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $623.99
$570
As low as $18.52/mo
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
MSRP: $512.86
$487
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $1,830
$1,519
As low as $49.36/mo
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,108.57
$2,529
As low as $82.19/mo
  • Quick-change tool post and 4 holders
  • HSS internal threading tool
  • Mt-2 live center; parting tool with HSS blade
  • 2-pc indexable turning tool (right and left hand)
  • Boring tool
MSRP: $303.99
$279
  • All steel construction
  • Two large cabinets with hinged locking locks to store supplies
  • Gray
  • 30" x 48" x 40"
  • Assembly required
MSRP: $921.43
$814
As low as $26.45/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.