JET

  • Layout
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
$960.00
$617.10
As low as $20/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$1,384.00
$883.00
As low as $28/mo
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$4,634.00
$2,650.99
As low as $86/mo
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
$276.00
$189.00
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$237.00
$169.00
View Details
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K at Elite Metal Tools
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$999.00
$638.99
As low as $20/mo
View Details
Jet JG-300, 3 Ton Grip Puller Without Cable 286530 at Elite Metal Tools
Jet JG-300, 3 Ton Grip Puller Without Cable 286530
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$1,072.00
$669.00
As low as $21/mo
View Details
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421 at Elite Metal Tools
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
$228.00
$165.00
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$3,438.00
$2,156.99
As low as $70/mo
View Details
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015 at Elite Metal Tools
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$430.00
$274.99
View Details
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185 at Elite Metal Tools
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$3,438.00
$2,156.99
As low as $70/mo
View Details
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187 at Elite Metal Tools
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$3,793.00
$2,379.99
As low as $77/mo
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$2,501.00
$1,601.99
As low as $52/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$4,723.00
$2,701.99
As low as $87/mo
View Details
Jet HD-3T, 3-Ton Wide Beam Clamp 202730 at Elite Metal Tools
Jet HD-3T, 3-Ton Wide Beam Clamp 202730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
$226.00
$163.00
View Details
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575 at Elite Metal Tools
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$506.00
$317.99
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$664.00
$455.00
View Details
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K at Elite Metal Tools
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$758.00
$508.00
As low as $16/mo
View Details
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187 at Elite Metal Tools
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$3,793.00
$2,379.99
As low as $77/mo
View Details
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189 at Elite Metal Tools
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$4,320.00
$2,709.99
As low as $88/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
$3,184.00
$1,996.99
As low as $64/mo
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$270.00
$186.00
View Details
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020 at Elite Metal Tools
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$442.00
$280.50
View Details
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415 at Elite Metal Tools
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415
  • 15' Power cord length to match an electric hoist with 15' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$284.00
$195.00
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.