JET

  • Layout
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,136.53
$19,993
As low as $395.66/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,366.39
$5,835
As low as $189.63/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,510.09
$8,202
As low as $266.56/mo
View Details
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,731.07
$19,695
As low as $389.76/mo
View Details
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,663.53
$19,645
As low as $388.77/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095
  • Certified Meehanite® castings
  • Large Diameter quill is chromed
  • Precision bored and honed milling head
MSRP: $22,974.26
$17,902
As low as $354.28/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,068.07
$7,995
As low as $259.83/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,597.89
$3,276
As low as $106.47/mo
View Details
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K at Elite Metal Tools
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,520.09
$7,682
As low as $249.66/mo
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,465
As low as $543.53/mo
View Details
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K at Elite Metal Tools
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,628.99
$7,740
As low as $251.55/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,433.99
$21,681
As low as $429.06/mo
View Details
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942 at Elite Metal Tools
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $74,666.45
$58,360
As low as $1,154.94/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,795
As low as $569.85/mo
View Details
Jet TS100-460-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144006K at Elite Metal Tools
Jet TS100-460-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144006K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $12,839.19
$7,325
As low as $238.06/mo
View Details
Jet TS500-460-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144015K at Elite Metal Tools
Jet TS500-460-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144015K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $24,455.19
$13,703
As low as $445.34/mo
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) 691184 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) 691184
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,406.53
$16,015
As low as $316.93/mo
View Details
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K at Elite Metal Tools
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,887.19
$9,590
As low as $311.67/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $21,622.80
$16,909
As low as $334.62/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,353.72
$32,727
As low as $647.66/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.