JET

Jet JAT-106, 3/8" Compact Impact Wrench 505106

3 Position forward & reverse power settings
Aluminum construction
Compact design of 4-5/7" long for hard to reach or tight work spaces
Ergonomically Designed Grip
Lightweight aluminum construction

MSRP: ~~$250~~

$175

View Details

Jet JAT-500, HVLP Spray Gun 505500

Gravity feed 600 cc cup included
High performance is coupled with a chrome-plated body for easier cleaning
HVLP technology improves material transfer for a more consistent coverage with minimal overspray
Includes 1.3 mm fluid nozzle with additional nozzle kits available
Lightweight, ergonomic design reduces operator fatigue

MSRP: ~~$339~~

$232.99

View Details

Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502

Complies with ANSI/ASME B30.1 standards
Dual purpose jack designed for low or high clearances increases versatility
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Heat treated piston resists corrosion
Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use

MSRP: ~~$450~~

$288

View Details

Jet JAT-412, 1/4" Industrial Gearless Die Grinder 505412

Advanced easy release safety lever
Comes with two wrenches for easy accessory changes
Composite handle for easy cleaning and comfort during extended use
Direct drive replaces beveled gearing for extended life
Kevlar rotor vanes to extend life and reduce maintenance

MSRP: ~~$329~~

$223.99

View Details

Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$926~~

$590.58

As low as $19.19/mo

View Details

Jet RCB-25 Rebar Cutter & Bender 5/8" Capacity 220025

Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
Easier cutting with the needle bearing design reduces operator fatigue
High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
Mountable on a board or floor allows for one-handed operation
Backed by our industry leading 1-Year Warranty

MSRP: ~~$1,152.50~~

$593

As low as $19.27/mo

View Details

Jet JAT-820, Flux Chipper 505820

Ball lock retainer permits quick tool change
Heavy-duty, heat-treated barrels and pistons for reliability and durability
Includes (1) wide angle chisel
Backed by the industry leading 2-Year Warranty

MSRP: ~~$408~~

$276.99

View Details

Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$513~~

$327.99

View Details

Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645

Comes with standard type retainer
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design
Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
Backed by the industry leading 2-Year Warranty

MSRP: ~~$951~~

$647.99

As low as $21.05/mo

View Details

Jet SJ-20T, 20-Ton Screw Jack 441320

Complies with ANSI/ASME B30.1 standards
Corrugated Pivoting Head
Corrugated pivoting head, contours to the load providing maximum surface contact
Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
Improved design requires less effort to lift a maximum capacity load

MSRP: ~~$344~~

$225

View Details

Jet JCT-5670, 1/2" Industrial Air Drill 550670

Auxiliary handle can be mounted on either side for increased operator control
Ergonomic "D" style handle with inside teasing trigger
External mounted Zerk® grease fittings feed lubricants to the industrial bearing design
Industrial gear train for high torque drilling applications
Backed by the industry leading 2-Year Warranty

MSRP: ~~$1,256~~

$861.99

As low as $28.01/mo

View Details

Jet JAT-752, 1/2" x 24" Mini Belt Sander 505752

360° head rotation for use in confined spaces and difficult angles
Aluminum construction
Built-in air regulator for precise speed control
Ergonomically Designed Grip
Lightweight aluminum construction

MSRP: ~~$509~~

$348.99

View Details

Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$328~~

$216

View Details

Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505

Complies with ANSI/ASME B30.1 standards
Dual purpose jack designed for low or high clearances increases versatility
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Heat treated piston resists corrosion
Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use

MSRP: ~~$764~~

$511

As low as $16.60/mo

View Details

Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$234~~

$167

View Details

Jet JCT-1604, Floor Sand Rammer / Backfill Tamper 550604

All Steel cylinder housing for increased durability
Heavy-Duty, industry proven valve design
Highly efficient way to quickly compact backfill and sand
Maximum power with slow, powerful blows for compacting large sand molds
Backed by the industry leading 2-Year Warranty

MSRP: ~~$1,420~~

$972.99

As low as $31.62/mo

View Details

Jet AHJ-12, 12-Ton Air / Hydraulic Bottle Jack 456612

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Electric welded bases and cylinders virtually eliminating leaks for proven reliability
Labor saving air pump that connects to a pneumatic source for increased lifting speed
Lifting, pushing, spreading, bending, pressing or straightening capabilities
Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use

MSRP: ~~$544~~

$389

View Details

Jet JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack 453312

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$234~~

$167

View Details

Jet JHJ-22-1/2L, 22-1/2-Ton Low Profile Hydraulic Bottle Jack 453323K

Complies with ANSI/ASME B30.1 and PALD-1 Standard
Heavy-duty bases are electrically welded providing a stable platform
Hydraulic system is protected from damage by internal by-pass mechanism
Industrial-duty construction permits use in extreme climates
Lifting, pushing, spreading, bending, pressing or straightening capabilities

MSRP: ~~$328~~

$216

View Details

Jet JCT-3622, 4" Stroke, Round Shank, 4-Bolt Chipping Hammer 550622

Comes with standard type retainer
Easy serviceability with the 4-bolt backhead
Ergonomic "D" style forged handle with outside trigger
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design

MSRP: ~~$973~~

$664.99

As low as $21.61/mo

View Details

Jet JCT-2612, 6" Rivet Buster 550612

Ergonomic Drop Forged "D" Style handle
Heat treated steel barrel for increased durability
Heavy-Duty, industry proven valve design
Ideal for busting large rivets or concrete demolition
Positive retention of piston for increased user safety

MSRP: ~~$2,206~~

$1,590.99

As low as $51.70/mo

View Details

Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

MSRP: ~~$364~~

$237.66

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift | S90-150-10 101920

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$474~~

$300.90

View Details

Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$904~~

$590.58

As low as $19.19/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.