JET

Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$414.00

$264.18

View Details

Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

$1,161.00

$739.99

As low as $24/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$11,370.00

$7,132.99

As low as $231/mo

View Details

Jet JAT-750, 3/8" x 13" Mini Belt Sander 505750

360° head rotation for use in confined spaces and difficult angles
Aluminum construction
Built-in air regulator for precise speed control
Ergonomically Designed Grip
Lightweight aluminum construction

$471.00

$323.99

View Details

Jet HD-5T, 5-Ton Wide Beam Clamp 202750

Clamp jaw is designed to distribute the load away from the beam flange edge
Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
Complies with ANSI / ASME B30.17 and B30.20 standards
Load tested to 125% of capacity with certificate
Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility

$276.00

$189.00

View Details

Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$8,998.00

$5,741.58

As low as $186/mo

View Details

Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$5,982.00

$3,752.18

As low as $121/mo

View Details

Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$9,728.00

$6,199.99

As low as $201/mo

View Details

Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

$630.00

$441.00

View Details

Jet JAT-482, 1/4", 1 HP Right Angle Die Grinder 505482

360° Rotating air inlet keeps the air hose tangle free for added safety
Impact resistant composite housings reduce tool weight and user fatigue.
Precision spiral bevel gears transfer torque and speed to spindle for added durability
Right-angle head design for reaching tight or angled grinding jobs
Tapered angle gear housing allows greater visibility of targeted work area

$386.00

$265.99

View Details

Jet JCT-1600, Benchtop Sand Rammer 550600

All Steel cylinder housing for increased durability
Fast powerful blows for compacting small, medium, and large sand molds
Front end seal protects the piston from excessive dirt and debris extending tool life
Heavy-Duty, industry proven valve design
Backed by the industry leading 2-Year Warranty

$817.00

$557.99

As low as $18/mo

View Details

Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410

10' Power cord length to match an electric hoist with 10' lift
4-button controller for electric hoist and trolley with 4-pin quick-connect plug
Push button controller with cable strain relief system for durability and reliability
Compatible with VOLT Series Hoist and Trolley combinations
Backed by our industry leading 2-Year Warranty

$237.00

$169.00

View Details

Jet JCT-3621, 3" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550621

Comes with standard type retainer
Easy serviceability with the 4-bolt backhead
Ergonomic "D" style forged handle with outside trigger
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design

$878.00

$598.99

As low as $19/mo

View Details

Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K

Double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch, or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$999.00

$638.99

As low as $20/mo

View Details

Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006

2/12 inch low profile allows for easy engagement of pallets
Lower material in a controlled decent with either hand or foot control for operator convenience
Overload Protection prevents lifting loads past maximum capacity
Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
Pumps designed for any industrial environment

$892.00

$575.00

As low as $18/mo

View Details

Jet PUC-37x25, Resin Utility Cart 140019

Compatible with Knaack Model CA-05 Cart Armour
Handle includes built-in storage bins for versatility
Industrial-duty, resin design that resists dents, chips, scratches and corrosion
Quiet, non-marking 5 inch casters for increased maneuverability
Rounded edges reduce damage to property and personnel

$342.00

$235.00

View Details

Jet SLT-330F, Scissor Lift Table With Folding Handle 140771

All steel design of frame and table permit the transport of heavy materials
Easy-To-Use Hydraulic Foot Pump
Easy-to-use hydraulic foot pump for precision raising and lowering of table
Fixed rear wheels feature parking brakes for added safety
Fold-down handle for easy storage

$830.00

$546.00

As low as $17/mo

View Details

Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$7,952.00

$5,078.00

As low as $165/mo

View Details

Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$2,152.00

$1,372.99

As low as $44/mo

View Details

Jet JAT-480, 1/4", 1 HP Die Grinder 505480

360° Rotating air inlet keeps the air hose tangle free for added safety
Comes standard with 1/4" Erickson collet
Impact resistant composite housings reduce tool weight and user fatigue.
Sealed ball bearing design keeps out contaminants promoting smooth operation
Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments

$297.00

$204.99

View Details

Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481

360° Rotating air inlet keeps the air hose tangle free for added safety
Comes standard with 1/4" Erickson collet
Extended design for additional reach
Impact resistant composite housings reduce tool weight and user fatigue.
Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments

$368.00

$249.99

View Details

Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$8,830.00

$5,629.38

As low as $182/mo

View Details

Jet JG-300, 3 Ton Grip Puller Without Cable 286530

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$1,072.00

$669.00

As low as $21/mo

View Details

Jet JAT-801, Needle Scaler 505801

Ball lock retainer permits quick tool change
Heavy-duty, heat-treated barrels and pistons for reliability and durability
Backed by the industry leading 2-Year Warranty

$550.00

$399.00

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.