JET

  • Layout
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo
View Details
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125 at Elite Metal Tools
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet IAFS-1700 1700 CFM Industrial Air Filtration System 1/3HP, 115V, Single Phase 415100 at Elite Metal Tools
Jet IAFS-1700 1700 CFM Industrial Air Filtration System 1/3HP, 115V, Single Phase 415100
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $1,696.69
$1,429
As low as $46.44/mo
View Details
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173 at Elite Metal Tools
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173
  • Fits all Industrial Grinders 8" and up
  • Fits all Square Wheel Grinders
MSRP: $451.43
$442
View Details
Jet JET — Horizontal Roller Material Support Stand 414121 at Elite Metal Tools
Jet JET — Horizontal Roller Material Support Stand 414121
  • Heavy-duty cast iron and steel construction
  • Chrome plated ball bearing roller head
  • Locking screws provide added safety
  • Interchangeable roller heads
MSRP: $198.57
$190
View Details
Jet JET — Replacement Fence for 14 in Vertical Band Saw 5782172 at Elite Metal Tools
Jet JET — Replacement Fence for 14 in Vertical Band Saw 5782172
MSRP: $195.65
$189
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $276
$189
View Details
Jet JET — V-Roller Stationary Material Support Stand 414122 at Elite Metal Tools
Jet JET — V-Roller Stationary Material Support Stand 414122
  • Heavy-duty cast iron and steel construction with chrome-plated ball bearing roller heads
  • Height adjusts from 23" to 38.5".
  • Locking screws for added safety
  • Roller heads are interchangeable
  • Gray
MSRP: $228.57
$212
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,358
$865.98
As low as $28.14/mo
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $656
$455
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $326
$215
View Details
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426 at Elite Metal Tools
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426
  • 10T
  • Replacement blade for for Jet VBS-18MWEVS Bandsaw
$179
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,634
$2,650.99
As low as $86.15/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $664
$455
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
$435
View Details
Jet JET — JPS-2A Pedestal Stand for Bench Grinders 577172 at Elite Metal Tools
Jet JET — JPS-2A Pedestal Stand for Bench Grinders 577172
  • Heavy-duty cast iron construction provides strength and durability
  • Wide stance base gives you a stable grinder workstation
  • Coolant tank and tool tray are on an adjustable platform for your convenience
  • Compatible with all JET Bench Grinders
MSRP: $227.14
$211
View Details
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127 at Elite Metal Tools
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127
  • Environmentally friendly
  • Excellent coolant and heat transfer
  • Non-flammable
  • Superior fluid stability
  • Longer tool life
MSRP: $248.14
$226
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308
  • Carbon steel
  • 4/6VT
  • 1" x .035" x 130"
$164
View Details
Jet IBG-Stand for IBG-8" & 10" Grinders 578172 at Elite Metal Tools
Jet IBG-Stand for IBG-8" & 10" Grinders 578172
  • Cast iron construction
  • Fits all JET grinders 6" to 10"
  • Heavy duty cast iron construction
  • Wide stance provides a stable workstation
MSRP: $327.14
$285
View Details
Jet JET — Infeed Roller Table for MBS-1323EVS 413413 at Elite Metal Tools
Jet JET — Infeed Roller Table for MBS-1323EVS 413413
  • Allows operator to push material through with safety and ease
  • Designed with Steel
  • Heavy duty construction providing stability, accuracy and precision to the operation
MSRP: $1,491.69
$1,215
As low as $39.48/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.