JET

  • Layout
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,112.89
$8,515
As low as $276.73/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,677.07
$20,390
As low as $403.51/mo
View Details
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $4,996.19
$2,880
As low as $93.60/mo
View Details
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030 at Elite Metal Tools
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,464
As low as $543.51/mo
View Details
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K at Elite Metal Tools
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,480.09
$9,901
As low as $321.78/mo
View Details
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503 at Elite Metal Tools
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,379.99
$22,376
As low as $442.82/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690623 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690623
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,677.72
$28,556
As low as $565.12/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,741.89
$10,039
As low as $326.26/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,042.07
$22,128
As low as $437.91/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691174 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691174
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,271.45
$15,916
As low as $314.97/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift Electric 2 Speed Trolley and 4 Button Wired Pendant 16ft 144003K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift Electric 2 Speed Trolley and 4 Button Wired Pendant 16ft 144003K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,174.89
$6,451
As low as $209.65/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO & X-Axis Powerfeed 351153 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO & X-Axis Powerfeed 351153
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $17,163.07
$13,479
As low as $438.06/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO 691173 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO 691173
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $18,649.72
$14,572
As low as $473.59/mo
View Details
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020 at Elite Metal Tools
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $520.29
$318
View Details
Jet 10-Ton Hand Chain Hoist with 30' Lift | S90-1000-30 101963 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 30' Lift | S90-1000-30 101963
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $5,020.39
$2,888
As low as $93.86/mo
View Details
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,731.07
$19,695
As low as $389.76/mo
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,751.79
$3,938
As low as $127.98/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,569.99
$33,620
As low as $665.33/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,973.72
$10,255
As low as $333.28/mo
View Details
On Sale
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $18,695.59
Was: $10,539
Now: $5,269.50
As low as $171.25/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095
  • Certified Meehanite® castings
  • Large Diameter quill is chromed
  • Precision bored and honed milling head
MSRP: $22,974.26
$17,902
As low as $354.28/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.